Festool VAC SYS VP - 240V Compressed Air Pump System 201657

Festool VAC SYS VP - 240V Compressed Air Pump System 201657 

The Festool vacuum clamping system makes the seemingly impossible become possible - clamping without limits. The VAC SYS Vacuum Clamping Compressed Air Pump creates suction power for use with the VAC SYS SE 1 Vacuum Clamping Unit and VAC SYS SE 2 Vacuum Clamping Unit. The pump is compact and lightweight for easy transportation in a systainer. Suitable for use in the workshop and on the job site.

Below details are for the combined use of this pump & a vacuum clamp SE1 or SE2.

Main Applications

  • Clamping of non-porous workpieces up to 30kg
  • Use with the MFT 3 multifunction table

Strengths And Benefits

  • Does not damage or mark surfaces
  • Base can be attached easily using clamps or screws
  • 360° rotation and 90° tilt for full manoeuvrability
  • Compact and light for easy transport
  • FastFix system allows fast tool-free pad changes

Clamping without a trace

The high-quality plastic used in the vacuum pad is so soft and flexible that the material surface is thoroughly protected. Even highly polished surfaces stay free of scratches and damage.

A strong hold

The clamping unit supports work pieces up to 30kg and 1m². For large work pieces, simply expand the system with a second clamping unit. A foot release valve allows you to release the suction while holding the work piece with two hands.

Versatile and flexible

You can securely clamp curved or rounded work pieces, thanks to the four different vacuum pads available. The FastFix system allows pads to be changed over quickly and tool-free.

Clamping without limits

The vacuum clamping system allows you to process work pieces from all sides without re-clamping, because the vacuum pad can be rotated through 360° and pivoted up to 90°.

Combine with the MFT system

The VAC SYS can be connected to the MFT 3 multifunction table using an adapter plate. When you have finished clamping, simply fold the VAC SYS down and out of the way.

Mobile

The pump is compact and lightweight for easy transport in a Systainer, as are the clamping units. Suitable for use in the workshop or on-site.

Specifications:

  • Protection: water and dust resistant
  • Voltage: 220 V - 240 V
  • Power Consumption at 50 Hz: 160 W min - 200 W max
  • Power Consumption at 60 Hz: 200 W min - 230 W max
  • Rotational Speed (rpm): 2800 rpm at 50 Hz, 3300 rpm at 60 Hz
  • Pump Capacity at 50 Hz (cubic meters/per hour): 2.7 cubic metres/hour
  • Pump Capacity at 60 Hz (cubic meters/per hour): 3.5 cubic metres/hour
  • Power Lead Type: Fixed Lead
  • Power Source: Corded
  • Dimensions - L x W x H (mm): 395 mm x 295 mm x 210 mm
  • Weight (kg): 8.0 kg
  • Frequency (Hz): 50 Hz / 60 Hz
  • Insulation Class: F
  • Noise Level (55 dB(A)): 55 dB(A)
  • Run Time (hours): 5000 hours - 8000 hours

Write a review

Please login or register to review

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au 

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

​Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions

Destination Zone Cart Total Requirement For Different Shipping Weight and Zone Postcode
Zone Name

0-3KG

3.01-6KG

6.01-10KG

10.01-20KG

 
Q0 Brisbane Metro

>=$99

4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1 Brisbane 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC Gold Coast 4210-4224, 4226-4269, 9726-9919
IP Ipswich 4300-4308
SC Sunshine Coast 4550-4579
N0 Sydney Metro

>=$99

>=$199

1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-
2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1 Sydney 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775,
2778-2786
N4 Tweed Heads 2485-2486
V0 Melbourne Metro 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1 Melbourne 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5 Coolangatta 4225
Q2 QLD Country Near 4309-4453, 4580-4693
Q3 QLD Country Mid

>=$99

>=$199

>=$299

>=$399

4454-4499, 4694-4802, 4804-4805, 9920-9960
GF Gosford 2250-2263
WG Wollongong 2500-2507, 2515-2532
NC Newcastle 2282-2310
CB Canberra 200-299, 2600-2620, 2900-2920
S0 Adelaide Metro 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1 Adelaide 5114, 5118-5124, 5131-5157, 5170-5200
N3 Albury 1936-1999, 2640-2641, 2708-2709
N2 NSW Country 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-
2879
V3 Wodonga 3689-3690
Q4 QLD Country North 4803, 4806-4999, 9961-9998
GL Geelong 3211-3220
W0 Perth Metro 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-
6996
W1 Perth 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991,
6997-6999
T0 Tasmania Select

>=$199

>=$299

>=$399

>=$699

7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1 Tasmania 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR Ballarat 3350, 3353-3356
V2 VIC Country 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925,
3945-3974, 3979, 3984-3999
AAT Aust Antarctic Territory* 7151-7154
S2 SA Country 2880-2889, 5201-5749
NT1 NT Near 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2 NT Remote 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF Norfolk Is* 2898-2899
W4 Christmas  & Cocos Is* 6798-6799
W2 WA Country South 6215-6700
W3 WA Country North 6701-6797

Festool VAC SYS VP - 240V Compressed Air Pump System 201657

FESTOOL Apprentice Cash Back Offers

  • Receive $50 cashback with any Festool Tool purchase worth $500 or above in one transaction.

  • Receive $150 cashback for every $1,000 spent on any Festool Tool in one transaction.

Apply online via CASHBACK REDEMPTION FORM

*Cashback must be claimed within 4 weeks from the date of invoice

*KA 65 Edge Bander is not eligible for cashback

*Terms and Conditions Applied

  • Views: 15934
  • Product Code: VAC SYS VP
  • Warranty:
  • RFQ

All Orders Over $99 Free Shipping*

Tags: Festool, 201657, VAC SYS VP, Compressed Air Pump, Air Pump System, Clamps Unit System

Festool FS-SP 1400/T Guide Rail Splinter Guard 495207 Technical Data: Festool FS Guide Rail..
$35.00
Festool KA 65-Plus Perfect Edge Set - KA 65 Conturo Edge Bander Perfect Edge Set 574874 The Contu..
RFQ
Festool VAC SYS SE1 – Vacuum Clamp Unit with 215mm Vacuum Pad 580061  The Festool VAC S..
RFQ
ProAmp PRO STEP 4-32 mm HSS Tin Coated Step Drill Bit HSS 4 - 32mm Step Drill Bit 1/4" HEX..
$50.00