Milwaukee M18FPP13A35686B - 18V FUEL 5.0Ah/6.0Ah/8.0Ah Li-ion Cordless 13pce Combo Kit
Freight:
This item is heavy and large, freight might vary from different locations, please contact us by Email or phone at (07) 3326 1555 for a more accurate shipping quote and/or any special shipping arrangements you may require.
This machine is heavy more than 30 kg, please make sure you have the lifting device to load. Otherwise, please order a Hydraulic Tail Lift Service in the accessory section. Thanks
According to the Australian Postage Regulation, this kit contains Lithium Battery that has exceeded the limit of 100 watt-hour and is classified as Dangerous Good.
It has Dangerous Goods charges beyond the freight. You can Request A Freight Quote
Or You can choose "Pickup from Store" to pick up the kit from our Mega Store in Banyo.
Includes:
- 1 x Milwaukee M18FPD30 - 18V 13mm M18 Fuel Cordless Hammer Drill/Driver Skin
- 1 x Milwaukee M18FID30 - 18V Li-ion Cordless Fuel GEN 4 1/4" Hex Impact Driver Skin
- 1 x Milwaukee M18FAG125XPD-0 - 18V Fuel 125mm (5") Cordless Brushless with Deadman Paddle Switch Angle Grinder Skin
- 1 x Milwaukee M18FH-0 - 18V 26mm Cordless M18 Fuel SDS PLUS Rotary Hammer Skin
- 1 x Milwaukee M18WDV-0 - 18V M18 7.5 Litre Wet/Dry Cordless Vacuum Skin
- 1 x Milwaukee M18CSX2-0 - 18V Fuel Sawzall Brushless Reciprocating Saw Skin
- 1 x Milwaukee M18FCS66-0 – 18V 184mm Cordless M18 FUEL Circular Saw Skin
- 1 x Milwaukee M18FMT-0 - 18V Cordless Brushless Multi Tool Skin
- 1 x Milwaukee M18RC-0 - 18V Cordless Worksite Jobsite Radio Charger Skin
- 1 x Milwaukee M18AL-0 - 18V Cordless LED Flood Light Skin
- 1 x Milwaukee M18FCHS-0 - 18V Li-ion Cordless 405mm (16") Chainsaw Skin
- 1 x Milwaukee M18FBL-0 - 18V Li-ion Cordless Fuel Blower Skin
- 1 x Milwaukee M18FIW2F12-0 - 18V Cordless M18 Fuel 1/2" Friction Ring Impact Wrench Skin
- 2 x Milwaukee M18B5 - 18V 5.0Ah M18 Red Lithium Battery
- 2 x M18™ REDLITHIUM™ HIGH OUTPUT 6.0Ah Battery(M18B6)
- 2 x Milwaukee M18HB8 - 18V 8.0Ah M18 REDLITHIUM-ION High Output Battery Pack
- 1 x Milwaukee M12-18FC - 12V/18V Rapid Charger
- 2 x MILWAUKEE Contractor Bag
Milwaukee M18FPD30 - 18V 13mm M18 Fuel Cordless Hammer Drill/Driver Skin
Features:
-
POWERSTATE™ Brushless Motor delivers 158 Nm of Max Torque with 2,100 RPM and 33,000 BPM
-
A redesigned trigger mechanism with improved fitment and smoother acceleration provides the ultimate trigger control
-
Offers an enhanced safety control mode, AUTOSTOP™, preventing over-rotations in bind-up situations
-
The new M-Clutch design enables the tool to handle a wider range of torque settings with improved drilling and fastening performance
Specifications:
- Peak Torque: 135Nm
- RPM: 0-550/ 0-2000
- BPM: 32000
- Chuck Type: 13mm All metal Ratcheting Chuck
- Length: 175mm
- Weight: 1.45kg
Milwaukee M18FID30 - 18V Li-ion Cordless Fuel GEN 4 1/4" Hex Impact Driver Skin
Features:
- Enhanced motor gives the M18FID3 0 - 4,400 IPM and 226 Nm of Max Torque
- Provides the user the ability to deliver power to more demanding applications back-to-back
- Enhanced motor delivers an improved 3,900 RPM when compared to previous generations
- Provides the user with increased range of speed to complete application fast and with minimal downtime
- Redesigned trigger mechanism with improved fitment and smoother acceleration
- Tri-LED lighting illuminating the area of work while eliminating shadows
- 4-Mode Drive Control provides users with greater control over the output speed and power
Specifications:
- Voltage: 18V
- Chuck Type: 1/4" Hex
- Maximum Torque: 226Nm
- Drive Control Speed:
- Mode 1: 0 - 1700rpm
- Mode 2: 3000rpm
- Mode 3: 3900rpm
- Mode 4: 3900rpm
- Drive Control Impacts:
- Mode 1: 0 - 1400ipm
- Mode 2: 3600ipm
- Mode 3: 4400ipm
- Mode 4: 4400ipm
- Overall Length: 113.5mm
- Weight: 1.0kg
Milwaukee M18FAG125XPD-0 - 18V Fuel 125mm (5") Cordless Brushless with Deadman Paddle Switch Angle Grinder Skin
Features:
- Next generation M18CAG125XPD with electronic and ergonomic upgrade
- More compact, lightweight and balanced design allow for more comfortable and manoeuvrable use
- POWERSTATE Brushless Motor provides 8,500 RPM
- REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity
- E-Clutch with kickback protection
- FIXTEC System allows 100% tool-free wheel change
- Paddle switch design provides increased comfort and ease-of-use in various positions
- Includes 125 mm (5") Type 27 Guard and Type 1 Clip-On Guard
Specifications:
- Platform: M18 FUEL
- No Load RPM: 8,500
- Vibration Reduction: Anti-vibration Handle
- Spindle Size: M14
- Kickback Prevention: Yes
- Tool Free Guard: Yes
- Type 1 Guard: Yes
- Type 27 Guard: Yes
- Disc Size: 125 mm (5")
- Switch Type: Paddle Switch, No-Lock
Milwaukee M18FH-0 - 18V 26mm Cordless M18 Fuel SDS PLUS Rotary Hammer Skin
Features:
- 3 mode (Rotary Hammer, Hammer Only, and Rotary Only)
- POWERSTATE™ Brushless Motor delivers fast drilling
- 2.7 J impact energy for hard hitting performance
- Anti-Vibration System (AVS) for maximum user comfort
- AUTOSTOP™ Kickback Control senses bind-up and prevents over-rotation
- REDLINK™ PLUS Intelligence integrates full-circle communication between tool, battery and charger to protect from overloads, over-heating and over-discharge
- Integrated LED light for illuminating dark workspaces
- Compatible with M18 FUEL™HAMMERVAC™ 26 mm Dedicated Dust Extractor (M18FDEX)
- Adjustable depth gauge rod for accurate hole depths
Specifications:
- Platform: M18 Fuel
- MAX RPM: 1,330
- BPM: 4,800
- Impact Energy: 2.7 J
- Vibration Reduction: Yes
- Drill Capacity: 26 mm (1")
- Length: 296 mm
- Weight: 3.1 kg
- Warranty-Tool: 5 Years
- Kickback Prevention: Yes
Milwaukee M18WDV-0 - 18V M18 7.5 Litre Wet/Dry Cordless Vacuum Skin
Features:
- Powerful suction for wet and dry applications.
- Quick and easy clean up for wood/metal shavings, drywall dust and other large area jobsite debris.
- Organised and enclosed on-board storage.
- Stackable tool box design.
Specifications:
- Voltage: 18V.
- Length: 421mm.
- Weight: 4.7kg.
- Max Air Flow : 1,274 L/min (45 CFM).
- Sealed Suction in Water: 813mm (32”) H²O Lift.
- Inlet Diameter – 31.8mm (1-1/4”).
Milwaukee M18CSX2-0 - 18V Fuel Sawzall Brushless Reciprocating Saw Skin
Features:
- POWERSTATE Brushless Motor provides fast cutting speed and power through tough applications
- Anti-corrosion blade clamp delivers durability with less downtime due to corrosion
- Metal reinforced battery connection provides improved durability and battery retention over life of the tool
- Built-in LED light illuminates work surface while cutting
- Lever action QUIK-LOK blade clamp provides fast, easy blade changes
- REDLINK™ PLUS Intelligence provides optimised performance and overload protection
- Adjustable shoe
- Hang hook
Specifications:
- Platform: M18
- Voltage: 18V
- SPM: 0 - 3,000
- LED Light: Yes
- Blade Clamp: QUIK-LOK Universal
- Keyless Adjustable Shoe: Yes
- Stroke Length: 32 mm (1-1/4")
- Hang Hook: Yes
- Keyless Blade Clamp: Yes
- Length: 434 mm
- Weight: 3.1 kg (Tool Only)
- Warranty: 5 years
Milwaukee M18FCS66-0 – 18V 184mm Cordless M18 FUEL Circular Saw Skin
Features:
- Maximum productivity: The brand-new higher performance POWERSTATE Brushless Motor delivers 5,800 RPM to rip through tough applications without bogging down.
- Fast cutting: The newly designed REDLINK PLUS Intelligence package ensures maximum performance of the tool under load, protecting against overload and overheating.
- Up to 750 cuts per charge: With increases in overall power and run time across the board, this new circular saw boasts performance like none other and can make up to 750 cuts in 2x4 per charge on the new REDLITHIUM®-ION High Output 12.0Ah Battery.
Specifications:
- Voltage: 18V
- RPM: 5,800 RPM
- Arbor Size: 15.88mm (5/8")
- Length: 419mm
- Weight: 5.9kg
- Maximum Bevel Capacity: 50 degrees
- Max Cutting Depth 45: 47.6mm
- Max Cutting Depth 90: 63.5mm
Milwaukee M18FMT-0 - 18V Cordless Brushless Multi Tool Skin
Features:
- POWERSTATE Brushless Motor, combined with 10,000 to 20,000 OPM delivers fast cut speed
- REDLINK PLUS Intelligence enables communication between tool and batteries, allowing for optimal levels of performance, protection, and compatibility
- Auto-Load feature allows user to start precise cuts slowly, and automatically ramp up to the highest speed under load
- Variable Speed Dial with 10 settings for adjusting speed to application
- Vibration dampening technology for low full tool vibration
- 4.2° oscillation angle
- 180° span LED for visibility in low-light situations
- Tool-free blade change for fast accessory changes
Specifications:
- Warranty: 5 Years
- Weight: 1.2 kg (Tool Only)
- Length: 310 mm
- OPM: 10,000 - 20,000
- Platform: M18 FUEL
- Speed Settings: 10
- Oscillation Angle: 4.2°
Milwaukee M18RC-0 -18V Cordless Worksite Jobsite Radio Charger Skin
Features:
- Shock absorbing metal handles.
- Reinforced roll cage for extra protection.
- Weather sealed auxiliary compartment for small belongings.
- Flip-up stand for electronic devices.
- 16" Aux input port for corded connection.
- Upgraded control panel with larger buttons for better control, even with gloves.
- White on black LCD for increased visibility in direct sunlight.
- Customizable equalizer and 10-station preset.
- Digital processor with 40W amplifier and premium speakers.
- Built in bottle opener.
- Quick convenient charging of all M18 batteries.
Specifications:
- Voltage: 18V
- Radio pre-set: FM (5), AM (5)
- Frequency response: 80Hz - 20Hz
- USB charger output: 2.1 Amp
- Size: 304 x 381 x 304mm
- Weight: 7.70 kg
- Charge Time (3.0Ah): 50 min
- Charge Time (4.0Ah): 70 min
- Bluetooth: Yes
- Warranty: 5 years
Milwaukee M18AL-0 - 18V Cordless LED Flood Light Skin
Features:
- The brightness you would expect from a corded 250 halogen light.
- Up to 8 hours run time on a 4.0Ah REDLITHIUM battery.
- Provides 1,100 lumens and 1,300 lux.
- Octagonal roll cage for customised light positioning.
- Impact-resistant lens.
- Multiple hanging features: Conduit, Keyhole and Crossbar
- Dual light settings: Low and High
- 5 year warranty
Specifications:
- Voltage: 18V
- Light type: 8 LED
- Light Settings: 2 Mode
- Run rate: 4.0Ah: 8 Hrs; 3.0Ah: 6 Hrs
- Dimensions (L x W x H): 222mm x 160mm x 160mm
- weight: 1.6kg
Milwaukee M18FCHS-0 - 18V Li-ion Cordless 405mm (16") Chainsaw Skin
Features:
- Variable Speed Trigger for full control
- Automatic oiler for proper chain lubrication and increased productivity
- Dual-Stud for improved bar and chain retention
- Onboard storage for scrench
- 405mm Oregon Bar and Chain
Specifications:
- Voltage: 18V
- Bar length: 405mm
- Chain gauge: 0.043"
- Chain pitch: 3/8" Low profile
- No load speed: 6600rpm
- Length: 838mm
- Weight: 6.3kg
Milwaukee M18FBL-0 - 18V Li-ion Cordless Fuel Blower Skin
Features:
- Increased power: moves more debris from a further distance, increasing productivity
- Power to clear from 4.6m to clear leaves, jobsite debris, and clippings in a single pass
- Full throttle in under 1 second
- Faster acceleration for instantaneous power
- Light weight design results in less end user fatigue
Specifications:
- Voltage: 18V
- Maximum Air Volume: 0 - 12.7m³/min
- Maximum Air Speed: 193kph
- Length: 858mm
- Weight: 2.2kg
Milwaukee M18FIW2F12-0 - 18V Cordless M18 Fuel 1/2" Friction Ring Impact Wrench Skin
Features:
- Friction ring ensures quick and easy socket changes
- POWERSTATE Brushless Motor delivers up to 339 Nm of nut-busting torque
- 4-Mode DRIVE CONTROL provides control over output speed and power
- Auto Shut-Off Mode prevents over tightening and increases productivity by applying no more than 27 Nm of torque
- Bolt Removal Mode delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
- 124.5 mm in length for maximum access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- Works in up to 69kV environments
- REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
Specifications:
- Platform: M18 Fuel
- Anvil Type: 1/2" Square with Friction Ring
- Nut Busting Torque: 339 Nm
- Fastening Torque: 339 Nm
- IPM: 0 – 1,000 / 0 – 2,400 / 0 – 3,500 / 0 – 3,500
- RPM: 0 – 900 / 0 – 1,650 / 0 – 2,400 / 0 – 2,400
- Drive Control: 4-Mode with Auto Shut-Off Mode & Bolt Removal Mode
- Length: 124.5 mm
- Weight: 1.1 kg (Tool Only)
- Warranty 5 Years
Milwaukee M18B5 - 18V 5.0Ah M18 Red Lithium Battery
Features:
- Versatility: Powers more than 120+ MILWAUKEE® M18™ cordless power tools
- REDLINK™ intelligence. Provides optimised performance and over load protection.
- Best in class construction. Offers long lasting performance and durability.
- Fuel gauge on board. Displays remaining run time for less down time on the job.
- All weather performance. Delivers fade free power in extreme jobsite conditions.
Specifications:
- Amp Hour: 5.0
- Platform: M18
- Voltage: 18V
- Warranty: 2 Years
- Weight: 720g
Milwaukee M18HB8 - 18V 8.0Ah M18 REDLITHIUM-ION High Output Battery Pack
Features:
- REDLINK PLUS Intelligence: Our battery circuitry provides optimised performance and overload protection using total system communication between tool, battery and charger
- Fuel gauge on board: Displays remaining run-time
- Compatible with all M18 tools
- Best-in-class construction: offers long-lasting performance and the best protection against jobsite, weather and environmental conditions
- Versatility: powers all 150+ M18 cordless solutions
- 2 year battery warranty by Milwaukee
Specifications:
- Voltage: 18V
- Amps: 8.0Ah
- Weight: 1.3kg
Milwaukee M12-18FC - 12V/18V Rapid Charger
Features:
- Charges batteries up to 40% faster
- Charges all M12 and M18 batteries, voltage 12v and 18v
- Sequential charging: automatically charges the second inserted pack once the first pack is fully charged
- REDLINK Intelligence: charger communicates with the battery pack to ensure optimum performance and extend the life
- M12 REDLITHIUM-ION 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 28 min / 45 min / 57 min / 90 min or less
- M18 REDLITHIUM-ION 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 26 min / 47 min / 59 min / 68 min/ 95 min or less
Specifications:
- Voltage: 18V
- Weight 0.8kg
- Warranty: 2 years
If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au
**We are able to dispatch goods Australia wide**
** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **
** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**
Free Shipping - For Orders Over $99 (Conditions applied)
* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.
C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.
The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.
Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.
This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.
Table1:
Over $99 Free Shipping - Terms and Conditions |
||||||
Destination Zone | Cart Total Requirement For Different Shipping Weight and Zone | Postcode | ||||
Zone | Name |
0-3KG |
3.01-6KG |
6.01-10KG |
10.01-20KG |
|
Q0 | Brisbane Metro |
>=$99 |
4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725 | |||
Q1 | Brisbane | 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549 | ||||
GC | Gold Coast | 4210-4224, 4226-4269, 9726-9919 | ||||
IP | Ipswich | 4300-4308 | ||||
SC | Sunshine Coast | 4550-4579 | ||||
N0 | Sydney Metro |
>=$99 |
>=$199 |
1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897 |
||
N1 | Sydney | 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786 |
||||
N4 | Tweed Heads | 2485-2486 | ||||
V0 | Melbourne Metro | 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999 | ||||
V1 | Melbourne | 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983 | ||||
Q5 | Coolangatta | 4225 | ||||
Q2 | QLD Country Near | 4309-4453, 4580-4693 | ||||
Q3 | QLD Country Mid |
>=$99 |
>=$199 |
>=$299 |
>=$399 |
4454-4499, 4694-4802, 4804-4805, 9920-9960 |
GF | Gosford | 2250-2263 | ||||
WG | Wollongong | 2500-2507, 2515-2532 | ||||
NC | Newcastle | 2282-2310 | ||||
CB | Canberra | 200-299, 2600-2620, 2900-2920 | ||||
S0 | Adelaide Metro | 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999 | ||||
S1 | Adelaide | 5114, 5118-5124, 5131-5157, 5170-5200 | ||||
N3 | Albury | 1936-1999, 2640-2641, 2708-2709 | ||||
N2 | NSW Country | 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879 |
||||
V3 | Wodonga | 3689-3690 | ||||
Q4 | QLD Country North | 4803, 4806-4999, 9961-9998 | ||||
GL | Geelong | 3211-3220 | ||||
W0 | Perth Metro | 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996 |
||||
W1 | Perth | 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999 |
||||
T0 | Tasmania Select |
>=$199 |
>=$299 |
>=$399 |
>=$699 |
7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999 |
T1 | Tasmania | 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799 | ||||
BR | Ballarat | 3350, 3353-3356 | ||||
V2 | VIC Country | 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999 |
||||
AAT | Aust Antarctic Territory* | 7151-7154 | ||||
S2 | SA Country | 2880-2889, 5201-5749 | ||||
NT1 | NT Near | 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999 | ||||
NT2 | NT Remote | 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905 | ||||
NF | Norfolk Is* | 2898-2899 | ||||
W4 | Christmas & Cocos Is* | 6798-6799 | ||||
W2 | WA Country South | 6215-6700 | ||||
W3 | WA Country North | 6701-6797 |