Metabo BL4SB2HD5.5CX - 18V 5.5Ah 4 Piece Cordless Brushless Combo Kit AU68400850
Limited Stock while Stock Lasts!
Includes:
- 1 X Metabo SB 18 LT BL - 18V Cordless Brushless Hammer Drill 602316890
- 1 X Metabo SSD 18 LTX 200 BL - 18V 200Nm Brushless Cordless Impact Driver Skin 602396890
- 1 X Metabo ULA 14.4-18 LED - 18V Cordless LED Torch Worklight 600368000
- 1 X Metabo SSE 18 LTX BL Compact - 18V Cordless Sabre Saw Skin 602366850
- 1 X Metabo ASC 55 - 12-36 V Air Cooled Charger 627047000
- 2 X Metabo 5.5 LiHD - 18V 5.5Ah LiHD Battery Pack 625368000
- 1 X Metabo Small Site / Tool Bag 657006000
Metabo SB 18 LT BL - 18V Cordless Brushless Hammer Drill 602316890
Features:
- Brushless hammer drill with compact design for universal and demanding applications
- Unique Metabo brushless motor for quick work progress and highest efficiency when drilling and screwdriving
- High-performance impact mechanism for optimum drilling performance
- Integrated working light to illuminate the contact area
- With handy belt hook and bit case which can be fixed either on the right or left side
- Battery packs with capacity display for checking the charge status
- Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.
Specifications:
- Characteristics
- Battery voltage: 18 V
- Maximum torque - soft: 34 Nm / 301 in-lbs
- Maximum torque, hard: 60 Nm / 531 in-lbs
- Adjustable torque: 0.7 - 8 Nm // 6 - 71 in-lbs
- Drill-Ø masonry: 13 mm / 1/2 "
- Drill Ø steel: 13 mm / 1/2 "
- Drill-Ø soft wood: 38 mm / 1 1/2 "
- No-load speed: 600 / 0 - 2100 rpm
- Maximum impact rate: 31950 bpm
- Chuck capacity: 1.5 - 13 mm // 1/16 - 1/2 "
- Weight : 1.5 kg
- Vibration
- Drilling in metal: 3.4 m/s²
- Uncertainty of measurement K: 1.5 m/s²
- Impact drilling concrete: 17 m/s²
- Uncertainty of measurement K: 1.5 m/s²
- Noise emission
- Sound pressure level: 91 dB(A)
- Sound power level (LwA): 102 dB(A)
- Uncertainty of measurement K: 3 dB(A)
Metabo SSD 18 LTX 200 BL - 18V 200Nm Brushless Cordless Impact Driver Skin 602396890
Features:
- Compact cordless impact driver with 1/4" hexagon socket and 200 Nm
- Unique Metabo brushless motor for quick work progress and highest efficiency for any application
- Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent overtightening.
- Twelve speed/torque levels for a wide range of applications
- Integrated work light for illumination of the work area
- Robust die cast aluminium gear housing for optimum heat dissipation and durability
- Handy belt hook, can be fixed either on the right or left side
- Battery packs with capacity display for checking the charge status
- Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.
Specifications:
- Battery voltag: 18 V
- Max. no-load speed: 2900 rpm
- Maximum impact rate: 4000 bpm
- Maximum torque: 200 Nm / 1770 in-lbs
- Speed/torque levels: 12
- Bit retainer: Hexagon recess 1/4" (6.35 mm)
- Weight (including battery pack): 1.3 kg / 2.9 lbs
- Vibration
- Impact screwdriving: 19.3 m/s²
- Uncertainty of measurement K: 2.9 m/s²
- Noise emission
- Sound pressure level: 94 dB(A)
- Sound power level (LwA): 105 dB(A)
- Uncertainty of measurement K: 3 dB(A)
Metabo ULA 14.4-18 LED - 18V Cordless LED Torch Worklight 600368000
Features:
- Compact and handy for versatile use.
- Powerful LED portable lamp for uniform, bright illumination of the working area.
- Lamp head can be tilted and locked in 12 positions.
- Robust aluminum die-cast housing for use on construction sites.
- The Metabo cordless system: Operation with all Li-Power push-fit battery packs with 14.4 and 18 volts.
- Swiveling hook for suspending the lamp
Specifications:
Maximum duration of illumination :
- 14.4 V / 1.5 Ah: 3.4h
- 14.4 V / 3.0 Ah: 6.8h
- 14.4 V / 4.0 Ah: 9h
- 18 V / 1.5 Ah: 4.8h
- 18 V / 3.0 Ah: 9.6h
- 18 V / 4.0 Ah: 12.7h
- 18 V / 5.2 Ah: 16.5h
- Weigh t: 0.39 kg
Metabo SSE 18 LTX BL Compact - 18V Cordless Sabre Saw Skin 602366850
Features:
- Light, extremely handy saw for one or two handed operation
- Especially suitable for working in difficult to reach places
- Unique Metabo brushless motor for quick work progress and highest efficiency for any application
- Variospeed (V) Electronics for working with customised stroke rates for the materials used
- Saw blade rotatable by 180° for working comfortably overhead
- Extended range of application thanks to unique Quick retainer for sabre saw blades and jigsaw blades
- Depth guide can be adjusted without tools for ideal utilisation of the saw blade and diverse applications such as plunge cuts
- Integrated LED work light for optimum illumination of the cutting line
- Wide range of uses thanks to the adapted Metabo saw blade range
- Battery packs with capacity display for checking the charge status
- Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.
Specifications:
- Characteristics:
- Battery voltage: 18 V
- Strokes in idle: 0 - 3000 rpm
- Saw blade stroke: 16 mm / 0.629 "
- Weight (including battery pack): 1.8 kg
- Vibration:
- Sawing chipboards: 13 m/s²
- Sawing wooden beam: 15 m/s²
- Uncertainty of measurement K: 2.5 m/s²
- Noise emission:
- Sound pressure level: 82 dB(A)
- Sound power level (LwA): 93 dB(A)
- Uncertainty of measurement K: 5 dB(A)
Metabo ASC 55 - 12-36 V Air Cooled Charger 627047000
Features:
- Monitored charging with microcontroller
- Battery diagnosis
- Charge time approximately 30 minutes at 1.5 Ah
- "AIR COOLED" function
- For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
- For charging all Li-Ion and LiHD slide-on battery packs (12 V - 36 V) with adapted battery pack charging current
- Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
- "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
- "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
Specifications:
- Battery voltage:12 - 36 V
- Mains voltage: 220 - 240 V
- Mains frequency: 50 - 60 Hz
Metabo 5.5 LiHD - 18V 5.5Ah LiHD Battery Pack 625368000
Features:
- LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
- Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
- Patented “AIR COOLED“ charging technology
- Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
- Processor-controlled charge and discharge management
- Capacity display with almost no self-discharge
- Capacity display with almost no self-discharge
- One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners: www.cordless-alliance-system.com
Specifications:
- Battery pack voltage: 18 V
- Battery pack capacity: 5.5 Ah
Metabo Small Site / Tool Bag 657006000
Features:
- The robust and compact Metabo tool bag
- On the inside of the bag, there are three bag separations with Hook & Loop straps for two battery packs and one charger
- On the outside, there is a spacious pocket with zipper and two other small pockets at the left and right head with Hook & Loop closure for quick access
- Comfortable side pads and padded shoulder strap
- Three reflective Metabo logos for optimum visibility on the construction site
- Stable, integrated base plate with strips to protect the bag contents
Specifications:
- Dimensions (lxwxh): 460 mm x 260 mm x 280 mm
- Material: water-repellent and tear-proof 600D Polyester
If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au
**We are able to dispatch goods Australia wide**
** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **
** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**
Free Shipping - For Orders Over $99 (Conditions applied)
* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.
C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.
The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.
Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.
This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.
Table1:
Over $99 Free Shipping - Terms and Conditions |
||||||
Destination Zone | Cart Total Requirement For Different Shipping Weight and Zone | Postcode | ||||
Zone | Name |
0-3KG |
3.01-6KG |
6.01-10KG |
10.01-20KG |
|
Q0 | Brisbane Metro |
>=$99 |
4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725 | |||
Q1 | Brisbane | 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549 | ||||
GC | Gold Coast | 4210-4224, 4226-4269, 9726-9919 | ||||
IP | Ipswich | 4300-4308 | ||||
SC | Sunshine Coast | 4550-4579 | ||||
N0 | Sydney Metro |
>=$99 |
>=$199 |
1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897 |
||
N1 | Sydney | 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786 |
||||
N4 | Tweed Heads | 2485-2486 | ||||
V0 | Melbourne Metro | 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999 | ||||
V1 | Melbourne | 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983 | ||||
Q5 | Coolangatta | 4225 | ||||
Q2 | QLD Country Near | 4309-4453, 4580-4693 | ||||
Q3 | QLD Country Mid |
>=$99 |
>=$199 |
>=$299 |
>=$399 |
4454-4499, 4694-4802, 4804-4805, 9920-9960 |
GF | Gosford | 2250-2263 | ||||
WG | Wollongong | 2500-2507, 2515-2532 | ||||
NC | Newcastle | 2282-2310 | ||||
CB | Canberra | 200-299, 2600-2620, 2900-2920 | ||||
S0 | Adelaide Metro | 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999 | ||||
S1 | Adelaide | 5114, 5118-5124, 5131-5157, 5170-5200 | ||||
N3 | Albury | 1936-1999, 2640-2641, 2708-2709 | ||||
N2 | NSW Country | 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879 |
||||
V3 | Wodonga | 3689-3690 | ||||
Q4 | QLD Country North | 4803, 4806-4999, 9961-9998 | ||||
GL | Geelong | 3211-3220 | ||||
W0 | Perth Metro | 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996 |
||||
W1 | Perth | 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999 |
||||
T0 | Tasmania Select |
>=$199 |
>=$299 |
>=$399 |
>=$699 |
7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999 |
T1 | Tasmania | 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799 | ||||
BR | Ballarat | 3350, 3353-3356 | ||||
V2 | VIC Country | 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999 |
||||
AAT | Aust Antarctic Territory* | 7151-7154 | ||||
S2 | SA Country | 2880-2889, 5201-5749 | ||||
NT1 | NT Near | 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999 | ||||
NT2 | NT Remote | 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905 | ||||
NF | Norfolk Is* | 2898-2899 | ||||
W4 | Christmas & Cocos Is* | 6798-6799 | ||||
W2 | WA Country South | 6215-6700 | ||||
W3 | WA Country North | 6701-6797 |