Makita DLX7003PT - 18V Cordless Brushless 7 Piece Combo Kit
Kit Includes:
- DHP481Z - 18V Cordless Brushless Hammer Drill Driver Skin
- DTD154Z - 18V Cordless Brushless Impact Driver Skin
- DGA505Z - 18V Cordless 125mm Brushless Angle Grinder Skin
- DHS680Z - 18V Cordless 165mm Brushless Circular Saw Skin
- DHR242Z - 18V Cordless Brushless Rotary Hammer Skin
- DML802 - 14/18V Cordless LED Flashlight Skin
- DMR107 - 18V Jobsite Radio Skin
- 2 x BL1850 - 18V 5.0Ah Li-Ion Battery
- DC18RD - 18V Same Time Dual Port Rapid Charger
- Tool Bag
Makita DHP481Z - 18v Li-ion Cordless Brushless Hammer Drill Skin
Features:
- Single sleeve keyless chuck.
- Mode ring selection.
- Mechanical 2 speed gearing.
- Twin LED job light with after-glow function.
- Battery fuel gauge shows power remaining in battery.
- Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving.
- All metal gear construction.
- Wider torque range of 1 - 10Nm in clutch mode allows for versatile applications.
- Single sleeve keyless chuck allows for easy bit installation.removal by one hand.
- High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation.
- Extreme Protection Technology with enhanced dust and drip resistant performance.
Specifications:
- Voltage: 18V
- Impacts Per Minute
- Hi: 0 - 31,000ipm
- Lo: 0 - 8,250ipm
- Max Fastening Torque:
- Hard: 115Nm
- Soft: 60Nm
- No Load Speed:
- Hi: 0 - 2,100rpm
- Lo: 0 - 550rpm
- Capacity:
- Masonry: 16mm
- Steel: 13mm
- Wood: 76mm
- Dimensions (L x W x H): 205mm x 79mm x 249mm
- Weight: 2kg
Makita DTD154Z - 18V 4-Mode Cordless Brushless Impact Driver Skin
Features:
- Brushless motor for more power and longer runtimes.
- Aluminium hammer case.
- One touch bit installation.
- Electronic 3 stage impact selection.
- T:mode for self drilling screws.
- Variable speed control by trigger.
- Ergonomically designed handle.
Specifications:
- Voltage: 18V
- Impacts per minute:
- Speed 1: 0 - 3800ipm
- Speed 2: 0 - 2600ipm
- Speed 3: 0 - 1100ipm
- Vibration level: 12.5m/s²
- Sound pressure level: 96dB(A)
- Sound power level: 107dB(A)
- No load speed:
- Speed 1: 0 - 3600rpm
- Speed 2: 0 - 2100rpm
- Speed 3: 0 - 1100rpm
- Capacity:
- Machine screw: M4 - M8
- Standard bolt: M5 - M16
- High strength bolt: M5 - M14
- Coarse thread (length): 22mm - 125mm
- Max fastening torque: 175Nm
- Dimensions (L x W x H): 117mm x 79mm x 236mm
- Weight: 1.2kg
Makita DGA505Z - 18V 125mm Brushless Angle Grinder Skin
Features:
- Powerful Brushless DC motor (BLDC)
- Paddle switch
- Automatic Torque Drive - changes the cutting speed to load condition for an optimum operation
- Battery fuel gauge
- Gear housing can be rotated to suit most cutting and grinding applications
- Anti-restart function prevents accidental start-up
- Concrete cutting depth of 20mm
- Extreme Protection Technology with enhanced dust and drip resistant performance
- Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
Specifications:
- Net Weight 2.5kg
- No Load Speed 8,500rpm
- Overall Length 362mm
- Wheel Size 125 x 22mm
Makita DHS680Z - 18V 165mm Brushless Circular Saw Skin
Features:
- Powerful Brushless DC motor (BLDC)
- Automatic Torque Drive; automatically increases motor torque according to load conditions
- Magnesium base with 45 and 50 degrees bevel cutting capacity
- Compact and lightweight design
- Rear dust exhaust port
- Twin LED job light with pre-glow
- LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
- Tool hanger for hanging on a ladder or rafter
- Large lock off lever easily operated even with a gloved hand
- Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
Specifications:
- Bevel Capacity: 50 degrees
- Blade Diameter: 165mm
- Max Cutting Capacities - at 0 degrees: 57mm
- Max Cutting Capacities - at 45 degrees: 41mm
- Max Cutting Capacities - at 50 degrees : 37mm
- Net Weight : 3.3kg
- No Load Speed : 5,000rpm
- Overall Length : 350mm
- Voltage : 18V
Makita DHR242Z - 18V Cordless 24mm Brushless Rotary Hammer Skin
Features
- 3 Mode operation: hammer only, rotation only, rotation & hammer
- Unique rubber joint suppresses vibration to battery
- 2.0j of impact energy
Specifications:
- Impact energy: 2.0j
- Impact Rate: 0 - 4,700ipm
- Max. drilling capacities in masonry: 24mm
- Max. drilling capacities in steel: 13mm
- Max. drilling capacities in wood: 27mm
- No Load Speed: 0 - 950rpm
- Overall Length: 328mm
- Skin weight: 2.7kg
- Vibration per min: 13.5m/s²
- Voltage: 18V
Makita DML802 - 14.4V & 18V LED Flashlight Skin
Features:
- Ergonomic design
- Up to 13hrs on a 3.0Ah battery
- Single 3.2W LED produces 160lm brightness
Specifications:
- Continuous runtime: 3.0Ah - 13hrs
- Illuminance: 4,000lx
- Luminous flux: 160lm
- Overall Length: 273mm
- Skin weight :0.33kg
- Voltage: 18V
- Includes: Strap Hook
Makita DMR107 - 18V Jobsite Radio Skin
Features:
- Compact design with IP64 rating ideal for jobsite conditions
- Flexible antenna can be removed and stored inside radio
- 2 x 76mm speakers provide 3.5W x 2 high quality audio
- AUX
- AC or Battery powered
- Practical max output when powered by a 18V battery
Specifications:
- Dimensions (LxWxH): 281x164x302mm
- Net Weight: 4.2kg
Makita BL1850B-L - 18V 5.0Ah Lithium Battery with Charge Indicator
Features:
- Fuel gauge indicator, displays charge remaining on battery in four stages
- Built in memory chip communicates the usage history with the charger
- Built in shock absorbers protect the cells from jobsite conditions
- High energy cells pack more power per cell to reduce number of cells and overall weight
- Large release button for easy removal from the tool
- Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
- 16 contact terminals provide consistent power and firm hold in any environment
Specifications:
- Cell Capacity: 5.0Ah
- Charge Time: 45mins w/DC18RC
- Net Weight: 630g
- Voltage: 18V
Makita DC18RD - 18V Dual Port Battery Charger 196936-0
Features:
- Simultaneous Charging – with dual ports for charging two batteries at the same time
- Rapid Charge Technology – selects the optimum voltage, current and temperature for improved charge time
- Forced Air System – circulates air through the battery to reduce temperature and charge time
- USB port – for charging 1.5A devices
- Full charge sound alert
- LED charging display
Specifications:
- Net Weight 1.9kg
- Overall Length: 200mm
- Voltage: 18V
Charging Times:
- Two - BL1815 18V Makita 1.5Ah Batteries 15 minutes + Universal USB port for charging mobile Devices
- Two - BL1830 18V Makita 3.0Ah Batteries 22 minutes + Universal USB port for charging mobile Devices
- Two - BL1840 18V Makita 4.0Ah Batteries 36 minutes + Universal USB port for charging mobile Devices
- Two - BL1850 18V Makita 5.0Ah Batteries 45 minutes + Universal USB port for charging mobile Devices
If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au
**We are able to dispatch goods Australia wide**
** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **
** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**
Free Shipping - For Orders Over $99 (Conditions applied)
* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.
C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.
The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.
Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.
This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.
Table1:
Over $99 Free Shipping - Terms and Conditions |
||||||
| Destination Zone | Cart Total Requirement For Different Shipping Weight and Zone | Postcode | ||||
| Zone | Name |
0-3KG |
3.01-6KG |
6.01-10KG |
10.01-20KG |
|
| Q0 | Brisbane Metro |
>=$99 |
4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725 | |||
| Q1 | Brisbane | 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549 | ||||
| GC | Gold Coast | 4210-4224, 4226-4269, 9726-9919 | ||||
| IP | Ipswich | 4300-4308 | ||||
| SC | Sunshine Coast | 4550-4579 | ||||
| N0 | Sydney Metro |
>=$99 |
>=$199 |
1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897 |
||
| N1 | Sydney | 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786 |
||||
| N4 | Tweed Heads | 2485-2486 | ||||
| V0 | Melbourne Metro | 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999 | ||||
| V1 | Melbourne | 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983 | ||||
| Q5 | Coolangatta | 4225 | ||||
| Q2 | QLD Country Near | 4309-4453, 4580-4693 | ||||
| Q3 | QLD Country Mid |
>=$99 |
>=$199 |
>=$299 |
>=$399 |
4454-4499, 4694-4802, 4804-4805, 9920-9960 |
| GF | Gosford | 2250-2263 | ||||
| WG | Wollongong | 2500-2507, 2515-2532 | ||||
| NC | Newcastle | 2282-2310 | ||||
| CB | Canberra | 200-299, 2600-2620, 2900-2920 | ||||
| S0 | Adelaide Metro | 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999 | ||||
| S1 | Adelaide | 5114, 5118-5124, 5131-5157, 5170-5200 | ||||
| N3 | Albury | 1936-1999, 2640-2641, 2708-2709 | ||||
| N2 | NSW Country | 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879 |
||||
| V3 | Wodonga | 3689-3690 | ||||
| Q4 | QLD Country North | 4803, 4806-4999, 9961-9998 | ||||
| GL | Geelong | 3211-3220 | ||||
| W0 | Perth Metro | 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996 |
||||
| W1 | Perth | 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999 |
||||
| T0 | Tasmania Select |
>=$199 |
>=$299 |
>=$399 |
>=$699 |
7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999 |
| T1 | Tasmania | 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799 | ||||
| BR | Ballarat | 3350, 3353-3356 | ||||
| V2 | VIC Country | 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999 |
||||
| AAT | Aust Antarctic Territory* | 7151-7154 | ||||
| S2 | SA Country | 2880-2889, 5201-5749 | ||||
| NT1 | NT Near | 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999 | ||||
| NT2 | NT Remote | 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905 | ||||
| NF | Norfolk Is* | 2898-2899 | ||||
| W4 | Christmas & Cocos Is* | 6798-6799 | ||||
| W2 | WA Country South | 6215-6700 | ||||
| W3 | WA Country North | 6701-6797 | ||||
Makita Limited Warranty
MAKITA POWER TOOLS & ACCESSORIES
Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):
*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.
**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.
***The spare parts must also have been fitted by an Authorised Service Agent.
Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:
• The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;
• The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and
• The repairs are not required as a result of normal wear and tear.
Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia “Makita” means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.
IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Makita (Australia) Pty Ltd ACN 001 117 335.
PLEASE RETAIN A COPY OF THE TAX INVOICE FOR YOUR WARRANTY.
Makita DLX7003PT - 18V Cordless Brushless 7 Piece Combo Kit
-0-1-1-242x242.jpg "Makita DLX2279TJ - 18V 5.0Ah Brushless 2 Piece Combo Kit")
-0-1-1-242x242.jpg "HiKOKI DH40MEY2(H1Z) - 1150W SDS Max 2 Mode Brushless Rotary Hammer Drill")