Makita DLX6093T - 18V 5.0Ah Cordless Brushless 6 Piece Combo Kit
The Makita DLX6093T was discontinued by our supplier. Please see other similar products
Includes:
- Makita DHP481Z - 18v Li-ion Cordless Brushless Hammer Driver Drill Skin
- Makita DTD154Z - 18V 4-Mode Cordless Brushless Impact Driver Skin
- Makita DGA504Z - 18V 125mm Brushless Angle Grinder Skin
- Makita DHS660Z - 18V Brushless 165mm (6.5") Circular Saw Skin
- Makita DHR182Z - 18V Brushless Cordless AWS 18mm Rotary Hammer Skin
- Makita DJR188Z - 18V Brushless Sub-Compact Recipro Saw Skin
- 2 x Makita BL1850B-L - 18V 5.0Ah Lithium Battery with Charge Indicator
- Makita DC18RC - 18V Active 3 Li-Ion Rapid Charger 195589-2
- Carry Bag – 831278-2
Makita DHP481Z - 18v Li-ion Cordless Brushless Hammer Driver Drill Skin
Features:
- Single sleeve keyless chuck.
- Mode ring selection.
- Mechanical 2 speed gearing.
- Twin LED job light with after-glow function.
- Battery fuel gauge shows power remaining in battery.
- Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving.
- All metal gear construction.
- Wider torque range of 1 - 10Nm in clutch mode allows for versatile applications.
- Single sleeve keyless chuck allows for easy bit installation.removal by one hand.
- High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation.
- Extreme Protection Technology with enhanced dust and drip resistant performance.
Specifications:
- Voltage: 18V
- Impacts Per Minute
- Hi: 0 - 31,000ipm
- Lo: 0 - 8,250ipm
- Max Fastening Torque:
- Hard: 115Nm
- Soft: 60Nm
- No Load Speed:
- Hi: 0 - 2,100rpm
- Lo: 0 - 550rpm
- Capacity:
- Masonry: 16mm
- Steel: 13mm
- Wood: 76mm
- Dimensions (L x W x H): 205mm x 79mm x 249mm
- Weight: 2kg
Makita DTD154Z - 18V 4-Mode Cordless Brushless Impact Driver Skin
Features:
- Brushless motor for more power and longer runtimes.
- Aluminium hammer case.
- One touch bit installation.
- Electronic 3 stage impact selection.
- T:mode for self drilling screws.
- Variable speed control by trigger.
- Ergonomically designed handle.
Specifications:
- Voltage: 18V
- Impacts per minute:
- Speed 1: 0 - 3800ipm
- Speed 2: 0 - 2600ipm
- Speed 3: 0 - 1100ipm
- Vibration level: 12.5m/s²
- Sound pressure level: 96dB(A)
- Sound power level: 107dB(A)
- No load speed:
- Speed 1: 0 - 3600rpm
- Speed 2: 0 - 2100rpm
- Speed 3: 0 - 1100rpm
- Capacity:
- Machine screw: M4 - M8
- Standard bolt: M5 - M16
- High strength bolt: M5 - M14
- Coarse thread (length): 22mm - 125mm
- Max fastening torque: 175Nm
- Dimensions (L x W x H): 117mm x 79mm x 236mm
- Weight: 1.2kg
Makita DGA504Z - 18V 125mm Brushless Angle Grinder Skin
Features:
- Powerful Brushless DC motor (BLDC)
- Slide switch
- Automatic Torque Drive - changes the cutting speed to load condition for an optimum operation
- Battery fuel gauge
- Gear housing can be rotated to suit most cutting and grinding applications
- Anti-restart function prevents accidental start-up
- Concrete cutting depth of 20mm
- Extreme Protection Technology with enhanced dust and drip resistant performance
- Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
Specifications:
- Net Weight: 2.5kg
- No Load Speed : 8,500rpm
- Overall Length : 362mm
- Wheel Size : 125 x 22mm
Makita DHS660Z - 18V Brushless 165mm (6.5") Circular Saw Skin
Features:
- Compact ergonomic design: adds manoeuvrability and control whilst reducing fatigue to the operator
- Brushless: delivers an incredible runtime with up to 137 cuts in 45 x 140 hardwood & 215 cuts in 38 x 235mm SPF with a 6.0Ah battery
- Dust extraction nozzle: for connection to dust extraction vacuum
- Efficut blade (right side): delivers superior performance with an advanced cutting design with no equal
- Blower function: helps to clear dust and away from the cut line
- Electric brake: quickly stops the blade rotation after the switch has been disengaged
- Twin LED job light: for improved visibility in low light environments
- Large bevel capacity: up to 50° bevel making it incredibly versatile for a wide range of cutting applications
- ADT(Automatic torque Drive Technology): automatically gives optimal rpm to torque ratio to produce the fastest cut in light or hard applications
Specifications
- Blade diameter:165mm
- Cut capacity: 57mm
- Blade position:Right side
- Bevel Capacity: 50°
- No load speed: 5,000rpm
- Overall length: 270mm
- Skinweight: 2.53g
- Voltage: 18V
Makita DHR182Z - 18V Brushless Cordless AWS 18mm Rotary Hammer Skin
Features:
- 3 mode operation; Hammer only, rotation only or rotation with hammer
- Low 11m/s² of vibration
- 1.7J of impact energy
- Auto-start Wireless System (AWS) compatible
- XPT technology enhances protection against dust and moisture
Specifications:
- Impact energy: 1.7J
- Impact Rate: 0-5,000ipm
- Max. drilling capacities in masonry: 18mm
- Max. drilling capacities in steel: 13mm
- Max. drilling capacities in wood: 24mm
- No Load Speed: 0-1,350rpm
- Overall Length: 280mm
- Skin weight: 2.1kg
- Vibration per min: 11.0m/s
- Voltage: 18V
Makita DJR188Z - 18V Brushless Sub-Compact Recipro Saw Skin
Features:
- 20mm stroke length with a cutting capacity of 255mm in wood
- Compact and lightweight for increased maneuverability
- High performance 3,000spm no load speed
- XPT technology that protects against dust and moisture
- One touch tool-less blade clamp
Specifications:
- Length of stroke: 20mm
- Max. cutting capacities in pipe: 130mm
- Max. cutting capacities in wood: 255mm
- Overall length: 316mm
- Skin Weight: 0-3000rpm
- Voltage: V1
Makita BL1850B-L - 18V 5.0Ah Lithium Battery with Charge Indicator
Features:
- Fuel gauge indicator, displays charge remaining on battery in four stages
- Built in memory chip communicates the usage history with the charger
- Built in shock absorbers protect the cells from jobsite conditions
- High energy cells pack more power per cell to reduce number of cells and overall weight
- Large release button for easy removal from the tool
- Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
- 16 contact terminals provide consistent power and firm hold in any environment
Specifications:
- Cell Capacity: 5.0Ah
- Charge Time: 45mins w/DC18RC
- Net Weight: 630g
- Voltage: 18V
Makita DC18RC - 18V Active 3 Li-Ion Rapid Charger 195589-2
Features:
- Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
- Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
- Forced air cooling fan - cools the battery to minimise charging time
- Digital power display identifies the condition of the battery and charging condition
Specifications:
- Voltage: 18V
- Cell capacity: 1.5Ah - 6.0Ah
- Charge Time:
- 1.5Ah: 15mins
- 3.0Ah: 22mins
- 4.0Ah: 36mins
- 5.0Ah: 45mins
- 6.0Ah: 55mins
- Length: 156mm
- Weight: 0.82kg
If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au
**We are able to dispatch goods Australia wide**
** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **
** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**
Free Shipping - For Orders Over $99 (Conditions applied)
* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.
C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.
The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.
Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.
This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.
Table1:
Over $99 Free Shipping - Terms and Conditions |
||||||
| Destination Zone | Cart Total Requirement For Different Shipping Weight and Zone | Postcode | ||||
| Zone | Name |
0-3KG |
3.01-6KG |
6.01-10KG |
10.01-20KG |
|
| Q0 | Brisbane Metro |
>=$99 |
4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725 | |||
| Q1 | Brisbane | 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549 | ||||
| GC | Gold Coast | 4210-4224, 4226-4269, 9726-9919 | ||||
| IP | Ipswich | 4300-4308 | ||||
| SC | Sunshine Coast | 4550-4579 | ||||
| N0 | Sydney Metro |
>=$99 |
>=$199 |
1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897 |
||
| N1 | Sydney | 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786 |
||||
| N4 | Tweed Heads | 2485-2486 | ||||
| V0 | Melbourne Metro | 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999 | ||||
| V1 | Melbourne | 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983 | ||||
| Q5 | Coolangatta | 4225 | ||||
| Q2 | QLD Country Near | 4309-4453, 4580-4693 | ||||
| Q3 | QLD Country Mid |
>=$99 |
>=$199 |
>=$299 |
>=$399 |
4454-4499, 4694-4802, 4804-4805, 9920-9960 |
| GF | Gosford | 2250-2263 | ||||
| WG | Wollongong | 2500-2507, 2515-2532 | ||||
| NC | Newcastle | 2282-2310 | ||||
| CB | Canberra | 200-299, 2600-2620, 2900-2920 | ||||
| S0 | Adelaide Metro | 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999 | ||||
| S1 | Adelaide | 5114, 5118-5124, 5131-5157, 5170-5200 | ||||
| N3 | Albury | 1936-1999, 2640-2641, 2708-2709 | ||||
| N2 | NSW Country | 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879 |
||||
| V3 | Wodonga | 3689-3690 | ||||
| Q4 | QLD Country North | 4803, 4806-4999, 9961-9998 | ||||
| GL | Geelong | 3211-3220 | ||||
| W0 | Perth Metro | 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996 |
||||
| W1 | Perth | 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999 |
||||
| T0 | Tasmania Select |
>=$199 |
>=$299 |
>=$399 |
>=$699 |
7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999 |
| T1 | Tasmania | 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799 | ||||
| BR | Ballarat | 3350, 3353-3356 | ||||
| V2 | VIC Country | 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999 |
||||
| AAT | Aust Antarctic Territory* | 7151-7154 | ||||
| S2 | SA Country | 2880-2889, 5201-5749 | ||||
| NT1 | NT Near | 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999 | ||||
| NT2 | NT Remote | 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905 | ||||
| NF | Norfolk Is* | 2898-2899 | ||||
| W4 | Christmas & Cocos Is* | 6798-6799 | ||||
| W2 | WA Country South | 6215-6700 | ||||
| W3 | WA Country North | 6701-6797 | ||||
Makita Limited Warranty
MAKITA POWER TOOLS & ACCESSORIES
Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):
*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.
**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.
***The spare parts must also have been fitted by an Authorised Service Agent.
Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:
• The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;
• The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and
• The repairs are not required as a result of normal wear and tear.
Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia “Makita” means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.
IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Makita (Australia) Pty Ltd ACN 001 117 335.
PLEASE RETAIN A COPY OF THE TAX INVOICE FOR YOUR WARRANTY.
