Makita DLX2455T - 18V 5.0Ah Li-Ion Cordless Brushless 2 Piece Combo Kit

The Makita DLX2455T has been discontinued, Please check for a similar product Makita DLX2516T - 18V Brushless 2 Piece 2 X 5.0ah Combo Kit

Includes:

• Makita DHP486Z - 18V Brushless Heavy Duty Hammer Driver Drill Skin
• Makita DTD172Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver
• 2 x Makita BL1850B-L - 18V 5.0Ah Lithium Battery with Charge Indicator
• Makita DC18RC - 18V Active 3 Li-Ion Rapid Charger 195589-2
• Carry Case

Makita DHP486Z - 18V Cordless Brushless Heavy Duty Hammer Driver Drill Skin

Features:

• Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
• Compact overall length only 178mm for use in narrow workspaces
• High powered brushless motor produces 141Nm peak torque
• High durability aluminium gear housing
• Mechanical 2-speed gearing with all-metal gear construction

Specifications:

• Max. Drilling Capacities in Wood:
  • Auger bit: 50 mm
  • Self-feeding bit: 76 mm
  • Hole saw: 152 mm
• Max. Drilling Capacities in Steel: 13 mm
• Max. Drilling Capacities in Masonry: 16 mm
• No Load Speed: 
  • Hi: 0 – 2,100 rpm
  • Lo: 0 – 550 rpm
• Impact Rate: 
  • Hi: 0 – 31,500 ipm
  • Lo: 0 – 82,500 ipm
• Max. Lock Torque: 141 Nm
• Max. Tightening Torque: 
  • Hard: 130 Nm
  • Soft: 65 Nm
• Overall Length: 178 mm
• Skin Weight: 2.1 kg
• Weight (with battery): 2.7 kg
• Voltage: 18 V

Makita DTD172Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver

Features:

• Slim Tool Body with a re-designed head that is slimmer than the previous  model enabling the tool to have greater access to tight corners or confided spaces
• One Touch Bit Installation has been designed to prevent  the bit from unexpectedly falling off. A more effective mechanism has been  designed increasing the strength of the chuck with out increasing the resistance  required to install a bit
• Enhanced Anvil Holder; material change from needle bearing to ball bearing  provides reduction of bit wobbling. Providing more stability and control when  fastening
• Quick Change Selector; one touch mode selector located above the trigger  allows the user to jump between modes single handed. Quickly changing between  modes improves efficiency as you no longer have to take your hand off the tool
• Light Mode enables the tool to be used as a torch in dark environments. To turn  the light on set the F/R change lever to the neutral position and pull the switch  trigger. To turn off the light pull the trigger again
• 4 Optimised Application Modes; T-mode 1 and 2 for  self drilling screws in both thick and thin sheet metal. Wood mode for fastening  long wood screws. Bolt mode with rotation auto stop for tightening / loosening  bolts
• 4-Speed Power Selection allow the user to adjust the  power, speed and impact rate to suit the fastening application

Specifications:

• Voltage: 18V
• Drive shank: 6.35mm (1/4") Hex
• Max tightening torque:
  • Max: 180Nm
  • Hard: 170Nm
  • Med: 50Nm
  • Soft: 20Nm
• No load speed:
• Max: 0 - 3600rpm
• Hard: 0 - 3200rpm
• Med: 0 - 2100rpm
• Soft: 0 - 1100rpm
• Impact rate:
• Max: 0 - 3800ipm
• Hard: 0 - 3600ipm
• Med: 0 - 2600ipm
• Soft: 0 - 1100ipm
• Max capacity:
• Standard bolt: M5 - M16
• High tensile bolt: M5 - M14
• Length: 114mm
• Weight: 0.9kg

Warranty: 3 Years Warranty Covered By Makita Australia

Makita BL1850B-L - 18V 5.0Ah Lithium Battery with Charge Indicator

Features:

• Fuel gauge indicator, displays charge remaining on battery in four stages
• Built-in memory chip communicates the usage history with the charger
• Built-in shock absorbers protect the cells from job site conditions
• High energy cells pack more power per cell to reduce the number of cells and overall weight
• Large release button for easy removal from the tool
• Built-in air vents and wall cools the battery cells evenly whilst blocking damaging debris
• 16 contact terminals provide consistent power and firm hold in any environment

Specifications:

• Cell Capacity: 5.0Ah
• Charge Time: 45mins w/DC18RC
• Net Weight: 630g
• Voltage: 18V

Makita DC18RC - 18V Active 3 Li-Ion Charger 195589-2

Features:

•  Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
•  Built-in CPU - gathers information from the battery's memory chip to determine the optimum charging method
•  Forced air cooling fan - cools the battery to minimise charging time
•  Digital power display identifies the condition of the battery and charging condition

Specifications:

• Voltage: 18V
• Cell capacity: 1.5Ah - 6.0Ah
• Charge Time: 
  • 1.5Ah: 15mins
  • 3.0Ah: 22mins
  • 4.0Ah: 36mins
  • 5.0Ah: 45mins
  • 6.0Ah: 55mins
• Length: 156mm
• Weight: 0.82kg