The DLX2308BX1 Blade Edition has been sold out. Please see the 5.0Ah DLX2308T or 6.0Ah DLX2308G as alternative options.

Makita DLX2308BX1 - 18V Cordless Brushless 2 Piece Limited Edition Black Combo Kit

Includes:

• DHP481ZB - 18v Cordless Brushless Limited Edition Black Hammer Drill Skin
• DTD171ZB - 18V Cordless Brushless 4 Stage Limited Edition Black Impact Driver Skin
• 2 x Makita BL1850B-L - 5.0Ah Lithium Battery with Charge Indicator
• DC18RD - 14.4-18v Dual Lithium Charger Fast Charger
• P-80977 – Tool Bag

Makita DHP481ZB - 18v Cordless Brushless Limited Edition Black Hammer Drill Skin

Features:

• Single sleeve keyless chuck
• Wider torque range of 1 - 10 Nm in clutch mode allows for versatile applications
• Modeling selection
• Mechanical 2-speed gearing
• Long rigid side grip helps to stabilize the bit for steady drilling/ screwdriving
• All metal gear construction
• Twin LED job light with afterglow function
• Battery fuel gauge shows power remaining in the battery
• Single sleeve keyless chuck allows for easy bit installation, removal by one hand
• High-performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation
• Extreme Protection Technology with enhanced dust and drip resistant performance

Specifications:

• Impacts Per Minute - Hi: 0-31,500 ipm
• Impacts Per Minute - Lo: 0-8,250 ipm
• Max Fastening Torque - Hard: 115 Nm
• Max Fastening Torque - Soft: 60 Nm
• Net Weight: 2.7 kg
• No Load Speed - Hi: 0-2,100 rpm
• No Load Speed - Lo: 0-550 rpm
• Overall Length   205: mm
• Capacity - Masonry: 16 mm
• Capacity - Steel: 13 mm
• Capacity - Wood: 76 mm
• Voltage: 18 V

Makita DTD171ZB - 18V Cordless Brushless 4 Stage Limited Edition Black Impact Driver Skin

Features:

• Enhanced anvil holder - material change from needle bearing to ball bearing provides more stability when using longer bits
• Quick switch function - the quick switch button allows the user to rapidly switch between the 4 stage impact selection or 2 pre-set function modes
• Multi-function control panel - control panel displays 4-stage impact selection as well as 4 mode functions. Assist mode, reverse rotation mode and Tek screw mode 1 and 2
• Brushless motor - powerful and compact the BL44 produces high power in a compact design ideal for rapid stop and start applications normally undertaken by impact drivers
• Left and right twin LED - twin LED job lights have been repositioned onto the left and right of the housing providing a brighter wider light. The LED light can also manually be turned on and off from the multifunction panel
• Variable speed trigger - as well as the multi-speed control panel the user can optimise the speed of the impact driver via the trigger
• XPT - eXtreme Protection Technology - enhances dust and drip resistant performance for use in outdoor applications or harsh environments

Specifications:

• Voltage:18 V
• Max capabilities - standard bolt: M5-M16
• Max capabilities - high tensile bolt: M5-M14
• No Load Speed
  • Max: 0 - 3600 rpm
  • Hard: 0 - 3200 rpm
  • Med: 0 - 2100 rpm
  • Soft: 0 - 1100 rpm
• Impact Rate       
  • Max: 0 - 3800 ipm
  • Hard: 0 - 3600 ipm
  • Med: 0 - 2600 ipm
  • Soft: 0 - 1100 ipm
• Max tightening torque: 180 Nm
• Drive shank: 6.35 mm (1/4" Hex)
• Overall Length: 116 mm
• Tool weight: 1.0 kg

Makita BL1850B-L - 5.0Ah Lithium Battery with Charge Indicator

Features:

• Star Protection
• Battery Fuel Gauge
• Multi-contact slide type terminal
• Protective gel coating
• Active 3 Controls current, voltage and thermal temperature
• Shock-absorbing construction
• The fastest charge times in the industry
• Intelligent battery & charger communication system
• Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
• Shock-absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
• Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
• Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
• Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
• Overheat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
• Up 66% more run time than BL1830*
• 4-Stage battery fuel indicator
• 45 minute charge time

Specifications:

• Voltage: 18V
• Dimensions (L x W x H): 11 x 8 x 6.5 cm
• Weight: 0.63 Kg

Makita DC18RD - 14.4-18v Dual Lithium Charger Fast Charger

Features:

• Fast charging - charges 2 x 3.0 Ah Lithium-Ion batteries at the same time in only 22 minutes
• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimize charging time
• LED charging display
• Full charge sound alert
• USB port provides 1.5 A output for charging smartphones, tablets, etc

Specifications:

• Cell Capacity: 1.5 - 5.0 Ah
• Charge Time: 15 mins (1.5 Ah), 22 mins (3.0 Ah), 36 mins (4.0 Ah), 45 mins (5.0 Ah)
• Net Weight: 1.9 kg
• Overall Length: 200 mm
• Voltage: 18V

Makita P-80977 – Tool Bag

Features:

• Uniquely designed, rigid gate-mouth opening with zip provides maximum access to the inside
• The spacious main compartment has ample room to hold various tools, power tools & accessories, etc
• Also features two rows of holders & pockets inside to provide a great organization of hand tools
• Inside stud poppers allows connection of the tool organizer (P-80868) or drawstring fixing pouch (P-80874) for greater working practicality and flexibility
• The heavy-duty shoulder strap with a pad for extra comfort & two long carry handles for safe, comfortable lifting
• 3L Technology - 3-layer material keeps its shape, providing extra cushioning
• Durable Polyester, Flexible Polypropylene, High-Grade Leather & 3D Air Mesh

Specifications:

• Capacity: 25 L
• Dimensions (L x W x H): 500 mm x 300 mm x 300 mm
• Weight: 1.93 kg