Click Image for Gallery

Makita DK0146X1 - 40V Max XGT 4.0Ah Cordless Brushless 3 Piece Combo Kit

Includes BL1830 - 18V 3.0Ah Battery While Stock Lasts.

Includes:

Makita TW001GZ - 40V Max XGT Cordless Brushless 3/4" Impact Wrench Skin
Makita GA013GZ - 40V Max XGT 125mm (5") Cordless Brushless Paddle Switch Angle Grinder Skin
Makita DGP180ZBK - 18V 440mm 10,000PSI Cordless Brushless Grease Gun Skin
Makita DC40RA - 40V Max Single Port Rapid Charger 191E09-4
2 × Makita BL4040 - 40V Max 4.0Ah Li-ion XGT Cordless Battery with Gauge 191B26-6
Makita ADP10 - 18V Battery Charger Adaptor 191C11-5 for DC40RA
Makita 832319-7 - Tote Bag

Makita TW001GZ - 40V Max XGT Cordless Brushless 3/4" Impact Wrench Skin

Features:

Heavy-duty power with 2,050Nm nut-busting torque
High durability construction with battery vibration suppression protecting the battery
Optimised application selector with 6 modes adapting speed and impacts for each task
Full speed mode shortens the distance of trigger travel required to hit full speed
4 Stage power selection for optimum rpm and fastening torque

Specifications:

Drive Shank: 3/4" Square C-Ring
Impact Rate: Max: 0-2,500ipm / Hard: 0 - 2,400ipm / Med: 0 - 2,200ipm / Soft: 0 - 1,900ipm
Max. capacities high tensile bolt: M10 - M27
Max. capacities standard bolt: M12 - M36
Max. fastening torque: Max: 1,800Nm / Hard: 1,500Nm / Medium: 840Nm / Soft: 450Nm
No Load Speed: Max: 0-1,800rpm / Hard: 0 - 1,400rpm / Med: 0 - 1,150rpm / Soft: 0 - 950rpm
Nut busting torque: 2,050Nm
Overall Length: 217mm
Skin weight: 3.2kg
Voltage: 40V Max
Weight (with battery): 4.2kg (BL4040)

Makita GA013GZ - 40V Max XGT 125mm (5") Cordless Brushless Paddle Switch Angle Grinder Skin

Features:

Heavy-duty power cutting 40% faster than the 18V equivalent model
High durability with advanced protection against heat and dust
Active feedback sensors shut down the tool in the event of a kickback
Enhanced safety features including an electric brake, soft start and anti-restart
Improved heat dissipation capacity allows for continuous heavy-duty use

Specifications:

Electric Brake: Yes
No Load Speed: 8,500rpm
Overall Length: 410mm
Skin weight: 2.2kg
Switch Type: Paddle Switch
Voltage: 40V Max
Weight (with battery): 3.2kg (BL4040)
Wheel diameter: 125mm (5")

Makita DGP180ZBK - 18V 440mm 10,000PSI Cordless Brushless Grease Gun Skin

Features:

Automatic pressure switching function maintains steady flow rate regardless of pressure
1,200mm flexible hose length for access to hard to reach places
Maximum 10,000psi discharge pressure and 295mL/min discharge rate
Variable speed trigger for control over the grease flow rate
LED job light with manual on and off switch
*Note: Without Battery and Charger

Specifications:

Barrel Capacity: 450g cartridge
Flow rate:
- Low: 145ml/min
- High: 290ml/min
Operating Pressure: 10,000psi (69MPa)
Overall Length: 440mm
Skin weight: 5.2kg
Voltage: 18V
Weight (with battery): 5.8kg

Makita DC40RA - 40V Max Single Port Rapid Charger 191E09-4

Features:

Rapid charging system communicates data between battery and charger for optimum charging
Equipped with dual cooling fans, cooling the battery & charging circuit for rapid charging
Compatible with ADP10 adaptor (optional accessory) for charging 18V LXT batteries
Large charging status indicator light & selectable full charge melody

Specifications:

Charge Time:
- 45mins (BL4040),
- 28mins (BL4025),
- 40mins (BL1860B-L using APD10)
Net Weight: 1.0kg
Voltage: 40V Max

Makita BL4040 - 40V Max 4.0Ah Li-ion XGT Cordless Battery with Gauge 191B26-6

Features:

Digital communication between the tool & battery for optimised performance
Heavy-duty cell casing significantly improves the batteries impact resistance
Battery ventilation system maximises battery life
Short circuit prevention structure protects terminals from dust and moisture
3-layer moisture protection shields cells from water ingress

Specifications:

Cell Capacity: 4.0Ah
Charge Time: 45mins
Energy Capacity: 144Wh
Net Weight: 1.0kg
Voltage: 40V Max

Makita ADP10 - 18V Battery Charger Adaptor 191C11-5 for DC40RA

Features:

Adapts to DC40RA for rapid charging of 18V LXT batteries
Rapid charge an 18V 6.0Ah battery in 40mins
Rapid charge an 18V LXT batteries up to 27% faster the 18V rapid charge models
Allows the flexibility of access to the 40V Max XGT and 18V LXT range

Specifications:

Charge time:
- 40mins (BL1860B-L)
- 40mins (BL1850B-L)
- 29mins (BL1840B-L)
- 22mins (BL1830B-L)
- 15mins (BL1815N-L)
Weight 0.24kg

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions
Destination Zone		Cart Total Requirement For Different Shipping Weight and Zone				Postcode
Destination Zone						Postcode
Zone	Name	0-3KG	3.01-6KG	6.01-10KG	10.01-20KG
Q0	Brisbane Metro	>=$99				4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1	Brisbane					4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC	Gold Coast					4210-4224, 4226-4269, 9726-9919
IP	Ipswich					4300-4308
SC	Sunshine Coast					4550-4579
N0	Sydney Metro	>=$99		>=$199		1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1	Sydney					2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786
N4	Tweed Heads					2485-2486
V0	Melbourne Metro					3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1	Melbourne					3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5	Coolangatta					4225
Q2	QLD Country Near					4309-4453, 4580-4693
Q3	QLD Country Mid	>=$99	>=$199	>=$299	>=$399	4454-4499, 4694-4802, 4804-4805, 9920-9960
GF	Gosford					2250-2263
WG	Wollongong					2500-2507, 2515-2532
NC	Newcastle					2282-2310
CB	Canberra					200-299, 2600-2620, 2900-2920
S0	Adelaide Metro					5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1	Adelaide					5114, 5118-5124, 5131-5157, 5170-5200
N3	Albury					1936-1999, 2640-2641, 2708-2709
N2	NSW Country					2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879
V3	Wodonga					3689-3690
Q4	QLD Country North					4803, 4806-4999, 9961-9998
GL	Geelong					3211-3220
W0	Perth Metro					6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996
W1	Perth					6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999
T0	Tasmania Select	>=$199	>=$299	>=$399	>=$699	7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1	Tasmania					7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR	Ballarat					3350, 3353-3356
V2	VIC Country					2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999
AAT	Aust Antarctic Territory*					7151-7154
S2	SA Country					2880-2889, 5201-5749
NT1	NT Near					0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2	NT Remote					0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF	Norfolk Is*					2898-2899
W4	Christmas & Cocos Is*					6798-6799
W2	WA Country South					6215-6700
W3	WA Country North					6701-6797

Makita Limited Warranty

MAKITA POWER TOOLS & ACCESSORIES

Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):

*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.

**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.

***The spare parts must also have been fitted by an Authorised Service Agent.

Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:

• The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;

• The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and

• The repairs are not required as a result of normal wear and tear.

Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia “Makita” means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.

IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Makita (Australia) Pty Ltd ACN 001 117 335.

PLEASE RETAIN A COPY OF THE TAX INVOICE FOR YOUR WARRANTY.

Makita DK0146X1 - 40V Max XGT 4.0Ah Cordless Brushless 3 Piece Combo Kit

Views: 3751
Makita
Product Code: DK0146X1
Warranty: