Click Image for Gallery

Makita DK0144G501 - 40V Max XGT 4.0Ah Cordless Brushless 5 Piece Combo Kit

Limited Stock. While Stock last!!!

Includes ADP10 - 18V Battery Adaptor for XGT Charger While Stock Lasts.

Includes:

HP001GZ - 40V Max Cordless Brushless Hammer Driver-Drill Skin
TD001GZ – 40V Max Cordless Brushless Impact Driver Skin
GA005GZ - 40V Max Cordless Brushless 125mm (5") Slide Switch Angle Grinder Skin
HR001GZ - 40V Max 28mm Brushless AWS* Rotary Hammer Skin
HS003GZ - 40V Max 185mm (7-1/4") Brushless AWS* Circular Saw Skin
BL4040 x 2 - 40V Max 4.0Ah Batteries
DC40RA - 40V Max Single Port Rapid Charger
832367-6 - Tool Bag

Makita HP001GZ - 40V Max Cordless Brushless Hammer Driver-Drill Skin

Features:

Heavy-duty power with 141Nm peak torque
Active feedback sensors shut down the tool in the event of a kickback
Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
35% faster-drilling speed compared with the equivalent 18V model
Electronic clutch for selecting between 41 torque range settings

Specifications:

Impact Rate: Hi: 0 - 39,000ipm / Lo: 0 - 9,750ipm
Max. drilling capacities in masonry: 20mm
Max. drilling capacities in steel: 20mm
Max. drilling capacities in wood: Auger bit: 50mm, Self-feeding bit: 76mm, Hole saw: 152mm
Max. lock torque: 125Nm
Max. peak torque: 141Nm
Max. tightening torque: Hard: 140Nm / Soft: 68Nm
No Load Speed: Hi: 0 - 2,600rpm / Lo: 0 - 650rpm
Overall Length: 182mm
Skin weight: 2.0kg
Voltage: 40V Max
Weight (with battery): 3.0kg (BL4040)

Makita TD001GZ – 40V Max Cordless Brushless Impact Driver Skin

Features:

Heavy-duty power with 220Nm max. torque
Precision fastening with enhanced anvil stability for less bit wobble
Optimised application selector with 6 modes adapting speed and impacts for each task
Single hand quick-change trigger allows user to change between speeds and modes at the touch of a button
Constant speed control allows tool to operate at the same speed regardless of battery capacity

Specifications:

Drive Shank: 6.35mm (1/4") Hex
Impact Rate: Max.: 0 - 4,400ipm / Hard: 0 - 3,600ipm / Med: 0 - 2,600ipm / Soft: 0 - 1,100ipm
Max. capacities high tensile bolt: M5 - M14
Max. capacities standard bolt: M5 - M16
Max. tightening torque: Max.: 220Nm / Hard: 170Nm / Med: 50Nm / Soft: 20Nm
No Load Speed: Max.: 0 - 3,700rpm / Hard: 0 - 3,200rpm / Med: 0 - 2,100rpm / Soft: 0 - 1,100rpm
Overall Length: 120mm
Skin weight: 1.0kg
Voltage: 40V Max
Weight (with battery): 1.7kg (BL4025)

Makita GA005GZ - 40V Max Cordless Brushless 125mm (5") Slide Switch Angle Grinder Skin

Features:

Heavy-duty power cutting 40% faster than the 18V equivalent model
High durability with advanced protection against heat and dust
Active feedback sensors shut down the tool in the event of a kickback
Enhanced safety features including an electric brake, soft start and anti-restart
Improved heat dissipation capacity allows for continuous heavy duty use

Specifications:

Electric Brake: Yes
No Load Speed: 8,500rpm
Overall Length: 410mm
Skin weight: 2.2kg
Switch Type: Slide Switch
Voltage: 40V Max
Weight (with battery): 3.2kg (BL4040)
Wheel diameter: 125mm (5")

Makita HR001GZ - 40V Max 28mm Brushless AWS* Rotary Hammer Skin

Features:

Heavy-duty power 2.8j** of impact force
Anti-vibration technology provides extremely low vibration of 7.0m/s²
Active feedback sensors shut down the tool in the event of a kickback
Compatible with AWS for wireless connectivity with compatible dust extraction
Dust management compatible with multiple options for various environments

Specifications:

Chuck Type: Standard
Impact energy: 2.8j
Impact Rate: 0-5,000ipm
Max. drilling capacities in masonry: TCT Bit: 28mm, Core Bit: 54mm, Diamond Core Bit: 65mm
No Load Speed: 0-980rpm
Overall Length: 373mm
Skin weight: 3.2kg
Sound pressure level: 95dB(A)
Vibration: 7.0m/s²
Voltage: 40V Max
Weight (with battery): 4.2kg (BL4040)

Makita HS003GZ - 40V Max 185mm (7-1/4") Brushless AWS* Circular Saw Skin

Features:

Heavy-duty power with cutting speeds faster than the equivalent 240V model
Safety protection with electric brake and soft start for user safety
Innovative technology with automatic torque drive optimising cutting speed & torque
Compatible with AWS* for wireless connectivity with compatible dust extraction
Lightweight design and optimised balance improving the tool’s manoeuvrability

Specifications:

Bevel Capacity: 0°- 56°
Blade Diameter: 185mm (7-1/4")
Bore Diameter: 20mm
Max. cutting capacities at 0°: 66mm
Max. cutting capacities at 45°: 45.5mm
Max. cutting capacities at max bevel: 34mm
No Load Speed: 6,000rpm
Overall Length: 331mm
Skin weight: 3.4kg
Voltage: 40V Max
Weight (with battery): 4.4kg (BL4040)

Makita BL4040 - 40V Max 4.0Ah Li-ion XGT Cordless Battery with Gauge 191B26-6

Features:

Digital communication between the tool & battery for optimised performance
Heavy-duty cell casing significantly improves the batteries impact resistance
Battery ventilation system maximises battery life
Short circuit prevention structure protects terminals from dust and moisture
3-layer moisture protection shields cells from water ingress

Specifications:

Cell Capacity: 4.0Ah
Charge Time: 45mins
Energy Capacity: 144Wh
Net Weight: 1.0kg
Voltage: 40V Max

Makita DC40RA - 40V Max Single Port Rapid Charger 191E09-4

Features:

Rapid charging system communicates data between battery and charger for optimum charging
Equipped with dual cooling fans, cooling the battery & charging circuit for rapid charging
Compatible with ADP10 adaptor (optional accessory) for charging 18V LXT batteries
Large charging status indicator light & selectable full charge melody

Specifications:

Charge Time:
- 45mins (BL4040),
- 28mins (BL4025),
- 40mins (BL1860B-L using APD10)
Net Weight: 1.0kg
Voltage: 40V Max

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions
Destination Zone		Cart Total Requirement For Different Shipping Weight and Zone				Postcode
Destination Zone						Postcode
Zone	Name	0-3KG	3.01-6KG	6.01-10KG	10.01-20KG
Q0	Brisbane Metro	>=$99				4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1	Brisbane					4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC	Gold Coast					4210-4224, 4226-4269, 9726-9919
IP	Ipswich					4300-4308
SC	Sunshine Coast					4550-4579
N0	Sydney Metro	>=$99		>=$199		1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1	Sydney					2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786
N4	Tweed Heads					2485-2486
V0	Melbourne Metro					3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1	Melbourne					3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5	Coolangatta					4225
Q2	QLD Country Near					4309-4453, 4580-4693
Q3	QLD Country Mid	>=$99	>=$199	>=$299	>=$399	4454-4499, 4694-4802, 4804-4805, 9920-9960
GF	Gosford					2250-2263
WG	Wollongong					2500-2507, 2515-2532
NC	Newcastle					2282-2310
CB	Canberra					200-299, 2600-2620, 2900-2920
S0	Adelaide Metro					5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1	Adelaide					5114, 5118-5124, 5131-5157, 5170-5200
N3	Albury					1936-1999, 2640-2641, 2708-2709
N2	NSW Country					2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879
V3	Wodonga					3689-3690
Q4	QLD Country North					4803, 4806-4999, 9961-9998
GL	Geelong					3211-3220
W0	Perth Metro					6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996
W1	Perth					6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999
T0	Tasmania Select	>=$199	>=$299	>=$399	>=$699	7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1	Tasmania					7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR	Ballarat					3350, 3353-3356
V2	VIC Country					2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999
AAT	Aust Antarctic Territory*					7151-7154
S2	SA Country					2880-2889, 5201-5749
NT1	NT Near					0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2	NT Remote					0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF	Norfolk Is*					2898-2899
W4	Christmas & Cocos Is*					6798-6799
W2	WA Country South					6215-6700
W3	WA Country North					6701-6797

Makita Limited Warranty

MAKITA POWER TOOLS & ACCESSORIES

Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):

*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.

**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.

***The spare parts must also have been fitted by an Authorised Service Agent.

Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:

• The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;

• The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and

• The repairs are not required as a result of normal wear and tear.

Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia “Makita” means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.

IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Makita (Australia) Pty Ltd ACN 001 117 335.

PLEASE RETAIN A COPY OF THE TAX INVOICE FOR YOUR WARRANTY.

Makita DK0144G501 - 40V Max XGT 4.0Ah Cordless Brushless 5 Piece Combo Kit

Views: 4847
Makita
Product Code: DK0144G501
Warranty: