HiKOKI KC18D3M(HRZ) - 18V Brushless Cordless 3 Piece Combo Kit
The HiKOKI KC18D3M(HRZ) has been discontinued, Please check for a similar product
Includes:
- 1 × HiKOKI DV18DBSL(H4Z) – 18V Brushless Cordless Slide Impact (Hammer) Driver Drill
- 1 × HiKOKI WH18DBSL(H4Z) – 18V Brushless Cordless Slide Impact Driver
- 1 × HiKOKI M1808DA(H4Z) – 18V Brushless Router Trimmer
- 2 × HiKOKI BSL36A18 – Li-Ion Slide Battery A
- 1 × HiKOKI UC18YSL3(H0Z) – Rapid Charger With Cooling & USB Port
- 1 × HiKOKI Large Site Bag
HiKOKI DV18DBSL(H4Z) – 18V Brushless Cordless Slide Impact (Hammer) Driver Drill
Features:
- Powerful brushless motor
- High-speed performance
- Compact and lightweight
- 2-speed mode (Low/High)
- Easy access clutch dial
- Spindle lock function
- LED light
Specifications:
- Type of power: 18V
- Type of motor: Brushless
- Capacity:
- Driving screw:
- Machine: 6mm
- Wood: 8mm dia x 100mm (with prepared holes)
- Drilling:
- 1.6mm Steel: 13mm
- 1.6mm Aluminium: 13mm
- 18mm Wood: 50mm
- Driving screw:
- Drill chuck capacity:
- Mount type: Screw-on (UNF 1/2" to 20)
- Diameter: 1.5-13mm
- No-load speed:
- Low: 0-400 (min-¹)
- High: 0-1,800 (min-¹)
- Max.impact rate:
- Low: 6000 (min-¹)
- High: 27,000 (min-¹)
- Max.torque:
- Soft: 40Nm
- Hard: 70Nm
- Slip torque: 22 positions 1.0-4.5Nm
- Weight: 1.7kg
- Dimensions (L x W x H ): 184 x 233 x 78mm
HiKOKI WH18DBSL(H4Z) – 18V Brushless Cordless Slide Impact Driver
Features:
- Powerful brushless motor
- High-speed performance
- Compact and lightweight
- Variable speed trigger switch
- Forward/reverse changeover lever with brake
- LED light
Specifications:
- Type of power: 18V
- Type of motor: Brushless
- Capacity:
- Small screw: 4-8mm
- Standard bolt: M5-M16
- High strength bolt: M5-M12
- Tightening torque*¹: 172Nm (This torque is measured when tightening an M16 high strength bolt (strength rating 12.9) for 3 seconds with a hexagonal socket.)
- Tip condition: 6.35mm bit holder
- No-load speed: 0-3,100 (min-¹)
- Impact rate: 0-3,400 (min-¹)
- Max. tightening torque: 172Nm
- Weight: 1.3kg
- Dimensions (L x H ): 128 x 222 mm
HiKOKI M1808DA(H4Z) – 18V Brushless Router Trimmer
Features:
- Variable speed control
- Easy access ON/OFF switch
- Safety switch operation
- LED light
Specifications:
- Collet cone capacity: 6.35 and 8mm
- No-load speed: 10,000 - 30,000 min-¹
- Type of motor: DC brushless motor
- Weight: 1.7kg
- Dimensions (L x H x W): 109 x 229 x 100 mm
HiKOKI BSL36A18 – Li-Ion Slide Battery A
Specifications:
- Voltage & Capacity: 36V - 2.5Ah / 18V - 5.0Ah (dual voltage)
- Cooling System: Yes
- Dimensions: 116 x 69 x 76mm
- Charging Times: Approx. 32min.*1 (when using the UC18YSL3 charger)
- Compatible Products:
- 18V: Existing 18V slide-type tools*2
- 36V: MultiVolt 36V tools
- Compatible Chargers: All chargers compatible with 14.4-36V slide-type Lithium-ion batteries
If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au
**We are able to dispatch goods Australia wide**
** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **
** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**
Free Shipping - For Orders Over $99 (Conditions applied)
* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.
C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.
The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.
Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.
This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.
Table1:
Over $99 Free Shipping - Terms and Conditions |
||||||
Destination Zone | Cart Total Requirement For Different Shipping Weight and Zone | Postcode | ||||
Zone | Name |
0-3KG |
3.01-6KG |
6.01-10KG |
10.01-20KG |
|
Q0 | Brisbane Metro |
>=$99 |
4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725 | |||
Q1 | Brisbane | 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549 | ||||
GC | Gold Coast | 4210-4224, 4226-4269, 9726-9919 | ||||
IP | Ipswich | 4300-4308 | ||||
SC | Sunshine Coast | 4550-4579 | ||||
N0 | Sydney Metro |
>=$99 |
>=$199 |
1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897 |
||
N1 | Sydney | 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786 |
||||
N4 | Tweed Heads | 2485-2486 | ||||
V0 | Melbourne Metro | 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999 | ||||
V1 | Melbourne | 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983 | ||||
Q5 | Coolangatta | 4225 | ||||
Q2 | QLD Country Near | 4309-4453, 4580-4693 | ||||
Q3 | QLD Country Mid |
>=$99 |
>=$199 |
>=$299 |
>=$399 |
4454-4499, 4694-4802, 4804-4805, 9920-9960 |
GF | Gosford | 2250-2263 | ||||
WG | Wollongong | 2500-2507, 2515-2532 | ||||
NC | Newcastle | 2282-2310 | ||||
CB | Canberra | 200-299, 2600-2620, 2900-2920 | ||||
S0 | Adelaide Metro | 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999 | ||||
S1 | Adelaide | 5114, 5118-5124, 5131-5157, 5170-5200 | ||||
N3 | Albury | 1936-1999, 2640-2641, 2708-2709 | ||||
N2 | NSW Country | 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879 |
||||
V3 | Wodonga | 3689-3690 | ||||
Q4 | QLD Country North | 4803, 4806-4999, 9961-9998 | ||||
GL | Geelong | 3211-3220 | ||||
W0 | Perth Metro | 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996 |
||||
W1 | Perth | 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999 |
||||
T0 | Tasmania Select |
>=$199 |
>=$299 |
>=$399 |
>=$699 |
7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999 |
T1 | Tasmania | 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799 | ||||
BR | Ballarat | 3350, 3353-3356 | ||||
V2 | VIC Country | 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999 |
||||
AAT | Aust Antarctic Territory* | 7151-7154 | ||||
S2 | SA Country | 2880-2889, 5201-5749 | ||||
NT1 | NT Near | 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999 | ||||
NT2 | NT Remote | 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905 | ||||
NF | Norfolk Is* | 2898-2899 | ||||
W4 | Christmas & Cocos Is* | 6798-6799 | ||||
W2 | WA Country South | 6215-6700 | ||||
W3 | WA Country North | 6701-6797 |