Hafco DCC-310 - 240V 1200cfm LPHV System Dust Collector & Cyclone Separator Kit K047

Hafco DCC-310 - 240V 1200cfm LPHV System Dust Collector & Cyclone Separator Kit K047

Freight:

This is a heavy and large item, freight might vary from different locations, please contact us by email or phone us on (07) 3326 1555 for a more accurate shipping quote and/or any special shipping arrangements you may require.

Delivery:

This heavy item is more than 91kg, please make sure you have the lifting device to load. Otherwise, please order a Hydraulic Tail Lift Service in the accessory section. Thanks.

Includes:

  • 1 x DC-3 - 240V 1200cfm 100mm LPHV System Dust Collector W394
  • 1 x FC-10 - Filter Cartridge W328
  • 1 x CDS-2/3 - 110L Cyclone Dust Separator W316
  • 1 x DCK-2 - Ø100mm (4") Dia Timber Dust Accessory Kit W344

Hafco DC-3 - 240V 1200cfm 100mm LPHV System Dust Collector W394

Overview

LPHV = Low Pressure High Volume System
The dust and shavings of LPHV extractors are sucked through the impeller fan blade and then the waste falls into the lower bag, the air being exhausted through the top filter bag, collecting some of the fine dust on the way. This type of extraction shifts huge volumes of air at low pressure and they are very efficient at removing bulk waste such from Planers, Thicknessers & Wood Lathes etc, hence some people call them chip collectors. The down fall with all LPHV dust collector systems is when you reduce the intake hose from 100mm to 32mm the air flow volume is affected dramatically. The fine filtration efficiency can be improved somewhat by fitting a filter cartridge instead of the bag.

Features:

  • 1200cfm air flow suction
  • Portable on wheels
  • Ø100mm twin inlets
  • Quick-action clamps
  • 5 Micron fine filter bag
  • 1.5kW / 2hp 240V motor

Specifications:

  • Type: Dust Collector
  • Airflow: 1200 CFM
  • LPHV - Low-Pressure High Volume: Yes
  • HPLV - High-Pressure Low Volume: No
  • Inlets / Diameter: No. 2 x Diameter 100mm
  • Motor Power: 1.5kW / 2hp
  • Voltage: 240V / 10amp
  • Floor Space (W x D x H): 1000 x 700 x 1950mm
  • Nett Weight: 42kg

Hafco FC-10 - Filter Cartridge W328

Overview

Suits most 500mm dust collectors including: DC-3, DC-5, DC-7, DC-80, DC-90

Features

  • 1 micron filtration
  • Increases filtering area by 700%
  • Rotary hand-wheel for manual cleaning the filter
  • Ø500 x 600mm high

Includes

  • 10 x plastic collection bags to suit dust collector

Hafco CDS-2/3 - 110L Cyclone Dust Separator W316

The main advantages of this CDS-2/3 cyclone separator is the ability to extract and hold large particles and chips before they reach the dust collector impellers resulting in no more loss of suction from blocked filters. The cyclone is designed as a pre-filter for your dust collector. It has no moving parts, and nothing to wear out, clog up or replace. 

Separates up to 99% of dust from the air stream prior to reaching the filter. This prevents your collector’s filter from clogging, allowing you to work safer and longer while saving you valuable time and money on replacement filters and collection bags. The mobile collection bin is fitted with a waste sight viewing window and wheels for easy disposal.

Features:

  • Large 110 litre metal collection bin
  • Air tight clamping with rubber seals
  • Ø152mm inlet with 2 x Ø100mm reducer
  • Ø152 - 25mm stepped outlet reducer, Ø152, 125, 100, 75, 63, 50, 25mm
  • Viewing window on collection bin for waist level
  • Capable of running dust bags in collection bin
  • Ideal for the up to 3hp dust collectors
  • Made in Taiwan

Specifications:

  • Type: Dust Collector / Cyclone
  • LPHV - Low Pressure High Volume: No
  • HPLV - High Pressure Low Volume: No
  • Inlets / Diameter: 2 x Ø100 (No. / mm)
  • Outlets / Diameter: Ø152 ~ 25mm (No. / mm)
  • Floor Space (W x D x H): 650 x 560 x 1700 mm
  • Nett Weight: 19kg

Hafco DCK-2 - Ø100mm (4") Dia Timber Dust Accessory Kit W344

This timber dust accessory kit consist of the most sought-after Ø100mm connections and attachments to connect your dust extraction unit to your machine.

Specifications:

  • ORDER CODE: W344
  • MODEL: DCK-2
  • Type: Dust Acces. Kit
  • Application: Timber
  • Size: Ø100mm Attachments
  • Suits: All Wood Dust Collectors
  • Shipping Dimensions: 645 x 621 x 339mm
  • Nett Weight: 8kg

Includes:

  • 2 x 3 metres x Ø100mm diameter dust hose
  • 10 x Hose clamps to suit Ø100mm diameter hose
  • 1 x 558mm wide floor sweeper attachment
  • 1 x Table saw hood
  • 1 x Universal dust hood
  • 1 x 150mm dust hood
  • 1 x "Y" connector
  • 2 x Shut-off valves

Write a review

Please login or register to review

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au 

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

​Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions

Destination Zone Cart Total Requirement For Different Shipping Weight and Zone Postcode
Zone Name

0-3KG

3.01-6KG

6.01-10KG

10.01-20KG

 
Q0 Brisbane Metro

>=$99

4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1 Brisbane 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC Gold Coast 4210-4224, 4226-4269, 9726-9919
IP Ipswich 4300-4308
SC Sunshine Coast 4550-4579
N0 Sydney Metro

>=$99

>=$199

1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-
2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1 Sydney 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775,
2778-2786
N4 Tweed Heads 2485-2486
V0 Melbourne Metro 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1 Melbourne 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5 Coolangatta 4225
Q2 QLD Country Near 4309-4453, 4580-4693
Q3 QLD Country Mid

>=$99

>=$199

>=$299

>=$399

4454-4499, 4694-4802, 4804-4805, 9920-9960
GF Gosford 2250-2263
WG Wollongong 2500-2507, 2515-2532
NC Newcastle 2282-2310
CB Canberra 200-299, 2600-2620, 2900-2920
S0 Adelaide Metro 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1 Adelaide 5114, 5118-5124, 5131-5157, 5170-5200
N3 Albury 1936-1999, 2640-2641, 2708-2709
N2 NSW Country 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-
2879
V3 Wodonga 3689-3690
Q4 QLD Country North 4803, 4806-4999, 9961-9998
GL Geelong 3211-3220
W0 Perth Metro 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-
6996
W1 Perth 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991,
6997-6999
T0 Tasmania Select

>=$199

>=$299

>=$399

>=$699

7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1 Tasmania 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR Ballarat 3350, 3353-3356
V2 VIC Country 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925,
3945-3974, 3979, 3984-3999
AAT Aust Antarctic Territory* 7151-7154
S2 SA Country 2880-2889, 5201-5749
NT1 NT Near 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2 NT Remote 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF Norfolk Is* 2898-2899
W4 Christmas  & Cocos Is* 6798-6799
W2 WA Country South 6215-6700
W3 WA Country North 6701-6797

Hafco DCC-310 - 240V 1200cfm LPHV System Dust Collector & Cyclone Separator Kit K047

According to the supplier's requirement, all Hafco, Scheppach, and Kool machinery are only sold to QLD customers from C&L Tool Centre. Please contact your local supplier if you are not in QLD. Apologies for any inconvenience caused.

  • Views: 1111
  • Product Code: DCC-310
  • Warranty:
  • RFQ

Oversize item Freight

Freight:
As this is a heavy and large item or oversized item, please send us an Email or call us at (07) 3326 1555 for a more accurate shipping quote and/or any special shipping requirement. Please try to offer a business address with a Forklift to get a cheaper rate. Thanks!

All Orders Over $99 Free Shipping*

Tags: Hafco, DCC-310, Hafco Dust Collector, LPHV system, 240V Dust Collector, Cyclone Separator Kit, K047, DC-3, CDS-2/3, FC-10, DCK-2

Hafco DC-100 - 415V 3860cfm LPHV System Industrial Dust Collector W3315 This item is no longer av..
RFQ
Hafco DCK-2 - Ø100mm (4") Dia Timber Dust Accessory Kit W344 This timber dust accessory kit consi..
$165.00
Hafco FC-10 - Ø500 x 600mm Filter Cartridge W328 Freight: This item is a large item, frei..
$297.00
Hafco CDS-2/3 - 110L Cyclone Dust Separator W316 The main advantages of this CDS-2/3 cyclone sepa..
$495.00
Hafco DC-2 - 240V 500cfm LPHV System Dust Collector W332 Overview: LPHV = Low Pressure High..
$275.00
Hafco DC-3 - 240V 1200cfm 100mm LPHV System Dust Collector W394 Overview: LPHV = Low Pres..
$462.00
Hafco DC-7 - 240V 2300cfm LPHV System Dust Collector W329 Freight: This item is a large i..
$649.00
Hafco DC-80 - 415V 2800cfm LPHV System Industrial Dust Collector W397 Freight: This item is a ..
$1,749.00
Hafco DC-90 - 415V 3200cfm LPHV System Industrial Dust Collector W331 Freight: This item is a ..
$1,969.00
OLTRE DC-1500 (8600702) - FM300 240V 2HP Dust Collector   Freight: This item is a heav..
$499.00
OLTRE DC-750 (8600705) - 500CFM 240V 1HP Dust Collector   Includes: 1HP 1 x Filt..
$325.00
Festool CXS 18 C4.0-Plus (578283) - CXS 18V 4.0Ah Cordless Compact 2 Speed Drill  Kit  ..
$795.00