Click Image for Gallery

Glenco Airmac T20P-70 - 17.3cfm 70L Tank 3 Cyl Petrol Air Compressor

Freight:
This item is heavy and large, freight might vary from different locations, please contact us by Email or phone on (07) 3326 1555 for a more accurate shipping quote and/or any special shipping arrangements you may require.

Delivery:
This heavy item is more than 100 kg, please make sure you have the lifting device to load it. Otherwise, please order a Hydraulic Tail Lift Service in the accessory section. Thanks.

Note: Battery not included – Please select the optional accessory above if required.

No electricity, no problem. Airmac offers an up to date range of Honda powered air compressors that are ideal for use out in the field. Each model from 5.5 to 13 hp is fitted with a genuine Honda petrol engine for superior performance, reliability, economy and lasting value.

Features:

Genuine Fusheng reciprocating air compressor pump. Low speed, single stage, full cast iron construction with a worldwide reputation for outstanding performance and reliability. Well proven in Australia for more than 25 years.
Superior pump design with a high strength forged steel crankshaft, low friction roller main bearings, extra large oil reservoir, long life piston rings, precision machined cylinders, deep directional cooling fins, robust plate-type inlet and exhaust valves, and low noise air intakes with replaceable filter elements.
Genuine Honda air-cooled overhead valve petrol engine fitted with a low oil alert protection system, auto-idle throttle controller, and an easy start unloading valve. Engine match tested and approved by Honda.
Extended service life V-belt drive fully enclosed by an impact resistant metal safety guard designed for easy maintenance access and high flow-through cooling. Extra thick steel baseplate and clamping plate together ensure optimum engine mounting alignment and rigidity.
Oversized air receiver tank for maximum air/energy storage. Abrasive blast cleaned prior to application of a three-stage paint system for long lasting corrosion protection. Mounted on puncture resistant solid rubber wheels or stationary rubber feet for effective vibration isolation.
Premium grade fasteners, fittings and piping used throughout. High flow, low back pressure brass check valve. Tamper-resistant fixed pressure differential pilot valve.
Fully compliant with Australian Safety Standards and Regulations for industrial workplace use.
2-year parts and factory labour warranty supplemented by an Australia-wide dealer network offering sales, service and genuine spare parts backup.

Specifications:

Pump Displacement cfm 17.3 - l/min 489
Free Air Delivery cfm 11.3 - l/min 319
Pump Model TA-65
No. Of Cyl 3
Pump Rpm 1024
Engine 5.5Hp
Electric Start Optional
Tank Volume 70L
Noise Level db 92
Outlet Size 1/4" bsp
Weight 114kg
DimensionsL100cm x H85cm x W44cm

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions
Destination Zone		Cart Total Requirement For Different Shipping Weight and Zone				Postcode
Destination Zone						Postcode
Zone	Name	0-3KG	3.01-6KG	6.01-10KG	10.01-20KG
Q0	Brisbane Metro	>=$99				4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1	Brisbane					4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC	Gold Coast					4210-4224, 4226-4269, 9726-9919
IP	Ipswich					4300-4308
SC	Sunshine Coast					4550-4579
N0	Sydney Metro	>=$99		>=$199		1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1	Sydney					2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786
N4	Tweed Heads					2485-2486
V0	Melbourne Metro					3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1	Melbourne					3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5	Coolangatta					4225
Q2	QLD Country Near					4309-4453, 4580-4693
Q3	QLD Country Mid	>=$99	>=$199	>=$299	>=$399	4454-4499, 4694-4802, 4804-4805, 9920-9960
GF	Gosford					2250-2263
WG	Wollongong					2500-2507, 2515-2532
NC	Newcastle					2282-2310
CB	Canberra					200-299, 2600-2620, 2900-2920
S0	Adelaide Metro					5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1	Adelaide					5114, 5118-5124, 5131-5157, 5170-5200
N3	Albury					1936-1999, 2640-2641, 2708-2709
N2	NSW Country					2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879
V3	Wodonga					3689-3690
Q4	QLD Country North					4803, 4806-4999, 9961-9998
GL	Geelong					3211-3220
W0	Perth Metro					6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996
W1	Perth					6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999
T0	Tasmania Select	>=$199	>=$299	>=$399	>=$699	7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1	Tasmania					7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR	Ballarat					3350, 3353-3356
V2	VIC Country					2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999
AAT	Aust Antarctic Territory*					7151-7154
S2	SA Country					2880-2889, 5201-5749
NT1	NT Near					0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2	NT Remote					0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF	Norfolk Is*					2898-2899
W4	Christmas & Cocos Is*					6798-6799
W2	WA Country South					6215-6700
W3	WA Country North					6701-6797

Glenco Airmac T20P-70 - 17.3cfm 70L Tank 3 Cyl Petrol Air Compressor

Views: 9792
Airmac
Product Code: T20P-70
Warranty:

$2,895.00

+ Add Optional Accessories

Total accessories: $0.0
Grand total: $2895

Qty

Add to Wish List Compare this Product

0 reviews / Write a review

Oversize item Freight

Freight:
As this is a heavy and large item or oversized item, please send us an Email or call us at (07) 3326 1555 for a more accurate shipping quote and/or any special shipping requirement. Please try to offer a business address with a Forklift to get a cheaper rate. Thanks!