Glenco Airmac T20D ES - 17.3cfm 70L 3Cyl Electric Start Diesel Compressor
Note: Battery not included – Please select optional accessory above if required.
Freight:
As this is a heavy and large item, please send us an Email or call us on (07) 3326 1555 for a more accurate shipping quote and/or any special shipping requirement.
Delivery:
This item is more than 117kg, please make sure you have a lifting device to unload it. Otherwise, please order a Hydraulic Tail Lift Service in the “Add Optional Accessories” section. Thanks.
Features:
- Yanmar Diesel Engine – Yanmar's direct fuel injection technology maximises combustion efficiency, thereby delivering more power while using less fuel. These rugged units are built to withstand the rigours of work out in the field.
- Automatic Throttle Control – Engine speed and compressor pump operation are both automatically regulated to match air demand. The engine returns to idle when possible to minimise fuel use, noise and wear.
- Electric Key-Start – Avoid the strain of rope pull starting by selecting an effortless twist-and-go electric start model. The removable starter key also provides security against unauthorised operation.
- Mine Specification – Electric start models are equipped with an emergency stop button and fail-safe fuel shut-off solenoid valve as standard. These are essential safety features for Mine Spec compliance.
- Oversized Air Receiver – For safety, the air tank complies with Australian Standard AS 1210. Its oversized capacity maintains a larger air energy reserve that also reduces pressure fluctuation and compressor load / unload cycling.
- Metal Safety Guard – The all-steel safety guard securely protects the rotating V-belt drive components. Airmac’s traditional metal guard is impact and UV resistant, unlike plastic guards as used by other makes.
- High Pressure – Applications requiring higher-thannormal air pressure of up to 1,200 kPa (175 psi) can select from four Airmac models specially equipped with efficient two-stage Fusheng compressor pumps.
- Vibration Isolators – Foot-mounted models are thoughtfully supplied with two sets of vibration isolators and fasteners to suit portable freestanding, fixed stationary or mobile vehiclemounted applications (pictured).
- 12 Volt Battery Kit Option – Convert your electric key-start compressor into a self-contained unit by adding a 12 V battery kit. It includes a maintenance-free battery, special mounting bracket and colour-coded battery leads.
- Filter-Regulator * – The 5 micron filter removes dirt, oil and water from the compressed air while the adjustable regulator controls output air pressure. A Nitto-style hose coupling is fitted to the air outlet port.
* Fitted to T20D & T20D ES models only
Specifications:
- Yanmar Engine: 4.7 hp L48
- Starter: Key Electric & Rope Pull
- Emergency Stop: Push Button
- Pump Displacement: 490 L/min (17.3 cfm)
- Free Air Delivery: 320 L/min (11.3 cfm)
- Maximum Pressure: 1,000 kPa (145 psi)
- Tank Volume: 70 Litres
- Pump Model: Fusheng TA-65
If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au
**We are able to dispatch goods Australia wide**
** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **
** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**
Free Shipping - For Orders Over $99 (Conditions applied)
* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.
C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.
The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.
Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.
This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.
Table1:
Over $99 Free Shipping - Terms and Conditions |
||||||
| Destination Zone | Cart Total Requirement For Different Shipping Weight and Zone | Postcode | ||||
| Zone | Name |
0-3KG |
3.01-6KG |
6.01-10KG |
10.01-20KG |
|
| Q0 | Brisbane Metro |
>=$99 |
4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725 | |||
| Q1 | Brisbane | 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549 | ||||
| GC | Gold Coast | 4210-4224, 4226-4269, 9726-9919 | ||||
| IP | Ipswich | 4300-4308 | ||||
| SC | Sunshine Coast | 4550-4579 | ||||
| N0 | Sydney Metro |
>=$99 |
>=$199 |
1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897 |
||
| N1 | Sydney | 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786 |
||||
| N4 | Tweed Heads | 2485-2486 | ||||
| V0 | Melbourne Metro | 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999 | ||||
| V1 | Melbourne | 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983 | ||||
| Q5 | Coolangatta | 4225 | ||||
| Q2 | QLD Country Near | 4309-4453, 4580-4693 | ||||
| Q3 | QLD Country Mid |
>=$99 |
>=$199 |
>=$299 |
>=$399 |
4454-4499, 4694-4802, 4804-4805, 9920-9960 |
| GF | Gosford | 2250-2263 | ||||
| WG | Wollongong | 2500-2507, 2515-2532 | ||||
| NC | Newcastle | 2282-2310 | ||||
| CB | Canberra | 200-299, 2600-2620, 2900-2920 | ||||
| S0 | Adelaide Metro | 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999 | ||||
| S1 | Adelaide | 5114, 5118-5124, 5131-5157, 5170-5200 | ||||
| N3 | Albury | 1936-1999, 2640-2641, 2708-2709 | ||||
| N2 | NSW Country | 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787- 2879 |
||||
| V3 | Wodonga | 3689-3690 | ||||
| Q4 | QLD Country North | 4803, 4806-4999, 9961-9998 | ||||
| GL | Geelong | 3211-3220 | ||||
| W0 | Perth Metro | 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992- 6996 |
||||
| W1 | Perth | 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999 |
||||
| T0 | Tasmania Select |
>=$199 |
>=$299 |
>=$399 |
>=$699 |
7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999 |
| T1 | Tasmania | 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799 | ||||
| BR | Ballarat | 3350, 3353-3356 | ||||
| V2 | VIC Country | 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999 |
||||
| AAT | Aust Antarctic Territory* | 7151-7154 | ||||
| S2 | SA Country | 2880-2889, 5201-5749 | ||||
| NT1 | NT Near | 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999 | ||||
| NT2 | NT Remote | 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905 | ||||
| NF | Norfolk Is* | 2898-2899 | ||||
| W4 | Christmas & Cocos Is* | 6798-6799 | ||||
| W2 | WA Country South | 6215-6700 | ||||
| W3 | WA Country North | 6701-6797 | ||||
Glenco Airmac T20D ES - 17.3cfm 70L 3Cyl Electric Start Diesel Compressor
- Views: 10910
-
Airmac
- Product Code: T20D ES
- Warranty:
- $6,899.00
+ Add Optional Accessories
- Total accessories: $0.0
- Grand total: $6899
Oversize item Freight
Freight:
As this is a heavy and large item or oversized item, please send us an Email or call us at (07) 3326 1555 for a more accurate shipping quote and/or any special shipping requirement. Please try to offer a business address with a Forklift to get a cheaper rate. Thanks!
