Dremel 9909 - 3.2mm Tungsten Carbide Cutter 2615009909

Dremel 9909 - 3.2mm Tungsten Carbide Cutter 2615009909

 

The Dremel 9909 has been discontinued by out supplier. Please see other similar products

High speed cutter. Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

Features:

  • Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods
  • Shapes, smooths or grinds especially hard materials
  • Made of tungsten carbide, the hardest material next to diamonds
  • High-speed cutter

*User Tips
Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Secure objects to a stable surface while working.
Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed.

Specifications:

  • BIT DIAMETER INCH: 1/8"
  • BIT DIAMETER MM: 3.2 mm
  • CONTENTS: 1 accessory
  • OVERALL LENGTH: 1.5

Write a review

Please login or register to review

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au 

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

​Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions

Destination Zone Cart Total Requirement For Different Shipping Weight and Zone Postcode
Zone Name

0-3KG

3.01-6KG

6.01-10KG

10.01-20KG

 
Q0 Brisbane Metro

>=$99

4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1 Brisbane 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC Gold Coast 4210-4224, 4226-4269, 9726-9919
IP Ipswich 4300-4308
SC Sunshine Coast 4550-4579
N0 Sydney Metro

>=$99

>=$199

1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-
2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1 Sydney 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775,
2778-2786
N4 Tweed Heads 2485-2486
V0 Melbourne Metro 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1 Melbourne 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5 Coolangatta 4225
Q2 QLD Country Near 4309-4453, 4580-4693
Q3 QLD Country Mid

>=$99

>=$199

>=$299

>=$399

4454-4499, 4694-4802, 4804-4805, 9920-9960
GF Gosford 2250-2263
WG Wollongong 2500-2507, 2515-2532
NC Newcastle 2282-2310
CB Canberra 200-299, 2600-2620, 2900-2920
S0 Adelaide Metro 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1 Adelaide 5114, 5118-5124, 5131-5157, 5170-5200
N3 Albury 1936-1999, 2640-2641, 2708-2709
N2 NSW Country 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-
2879
V3 Wodonga 3689-3690
Q4 QLD Country North 4803, 4806-4999, 9961-9998
GL Geelong 3211-3220
W0 Perth Metro 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-
6996
W1 Perth 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991,
6997-6999
T0 Tasmania Select

>=$199

>=$299

>=$399

>=$699

7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1 Tasmania 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR Ballarat 3350, 3353-3356
V2 VIC Country 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925,
3945-3974, 3979, 3984-3999
AAT Aust Antarctic Territory* 7151-7154
S2 SA Country 2880-2889, 5201-5749
NT1 NT Near 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2 NT Remote 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF Norfolk Is* 2898-2899
W4 Christmas  & Cocos Is* 6798-6799
W2 WA Country South 6215-6700
W3 WA Country North 6701-6797

Dremel 9909 - 3.2mm Tungsten Carbide Cutter 2615009909

Tags: Dremel, 9909, 3.2mm, Tungsten, Carbide, Cutter, 2615009909, Carving, Engraving, Routing, DREMEL, 9909

This Tip is discontinued now, Please see Dremel 9924 Carbide Engraving Point DREMEL 9929 - D..
RFQ
Arbortech MIN.FG.900.00 - 1000W 900 Series Mini Carver Includes: 1 x Diamond Disc (2 1/8" x..
$399.00
Dremel 121 - High Speed Cutter 2615000121 Features: Ideal for shaping, hollowing, grooving,..
$12.90
Dremel 134 - High Speed Cutter 2615000134 Features: Ideal for shaping, hollowing, grooving,..
$14.80
Prochoice PC315 - Safety Gear Dust Masks P1+Valve Box of 12 Features: P1 rating indicates s..
RFQ
Dremel 9906 - 3.2mm Tungsten Carbide Cutter 2615009906 Tungsten Carbide Cutters are ideal for sha..
$24.00
Supatool  5638 - 150mm (6") Plastic Vernier Caliper Supatool  5638 - 150mm (6") Plastic..
RFQ
Dremel 111 - 0.8mm Engraving Cutter 26150111AC Specifications: Bit Diameter Inch: 1/32" B..
RFQ
Dremel 108 - 0.8mm Engraving Cutter 26150108AC Specifications: Bit Diameter Inch: 1/32" B..
RFQ
Dremel 7134 - 2.0mm Diamond Wheel Point Specifications: Bit Diameter mm: 2.0 mm Over..
$21.95
Dremel 118 - High Speed Cutter 2615000118 Features: Ideal for shaping, hollowing, grooving,..
$17.00
Dremel 193 - 2.0mm High Speed Cutter 2615000193 A versatile, high-quality cutter made of high-gra..
$14.95
Dremel 106 - 1.6mm Engraving Cutter 2Pk 26150106AC Specifications: Bit Diameter Inch: 1/16"..
$15.95
Dremel 4485 - Quick Change Collet Nut Set 2615504485 Improve the grip for bits in our rotary tool..
$25.00
Dremel 7103A - 2.0mm Diamond Wheel Point Specifications: BIT DIAMETER INCH: 5/64" BIT DIA..
$23.00
Dremel 7144 - 2.4mm Diamond Wheel Point 26157144AE   The Dremel 7144 has been discon..
RFQ