DEWALT DCF894N-XJ - 18V XR Cordless Brushless 1/2" Mid Torque Impact Wrench Skin

DEWALT DCF894N-XJ - 18V XR Cordless Brushless 1/2" Mid Torque Impact Wrench Skin

 

The DCF894N-XJ has been discontinued, Please check for a similar product 

The DCF894N-XJ is the newest mid-range Impact Wrench from DEWALT that has the size of a small and compact impact wrench but with full size power of larger models of years past. The DCF894N-XJ delivers 680Nm of nut busting torque, 3 speeds including PRECISION WRENCH CONTROL, 1/2" cold forged anvil.

Features:

  • All-new 18V BRUSHLESS XR Compact High-Torque Wrench featuring Precision Wrench™
  • Powerful fan cooled motor delivers up to 447Nm of torque and 3100 impacts per minute for heavy duty fastening applications
  • At just 178mm long and weighing only 1.5kg, the tool retains power whilst being compact enough to get into tight spaces
  • 3 mode settings (Low, Precision Wrench™, High) for optimal control over fastening applications, reducing the risk of damage to material, accessories and components;
  • "Low mode" runs at a slower speed in forwards for more delicate fastening applications, but runs at full speed in reverse where high torque is less of a problem.
  • Precision Wrench™ in forward runs the fastener is run up at full speed until the tool starts to impact. As soon as this happens the tool pauses to allow the user to stop, then impacts at 3100ipm if more torque is required.
  • Precision Wrench™ in reverse impacts at high speed to loosen the fastener. Once the tool senses that the fastener is loose, it slows down to prevent running the fastener off.
  • High speed offers full speed in forward and reverse
  • 1/2" (13 mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention
  • Bright white LED located on foot of tool with delay feature for improved visibility and flashlight functionality
  • Comfortable rubber XR grip and switch for greater application comfort and maximum control
  • Up to 813Nm of "breakaway" torque for stubborn bolts

Applications:

  •  Fastening small metal constructions
  • Automotive fastening applications
  • Anchoring of support jacks, angles, brackets in concrete, solid brick etc
  • Fastening roofs to metal girders
  • Servicing applications on heavy machinery
  • Fastening wooden forms for making concrete constructions
  • Fastening extruded metal sheet to metal frames for roofing
  • Fastening sandwich panels to the building or roof structure

Specifications:

  • Voltage: 18V
  • Bit holder: 1/2"
  • No load speed:
    • Lo: 0 - 900rpm
    • Hi: 0 - 2000rpm
  • Impacts per min: 0 - 3100ipm
  • Max torque: 447Nm
  • Weight: 1.5kg

 

 

Write a review

Please login or register to review

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au 

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

​Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions

Destination Zone Cart Total Requirement For Different Shipping Weight and Zone Postcode
Zone Name

0-3KG

3.01-6KG

6.01-10KG

10.01-20KG

 
Q0 Brisbane Metro

>=$99

4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1 Brisbane 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC Gold Coast 4210-4224, 4226-4269, 9726-9919
IP Ipswich 4300-4308
SC Sunshine Coast 4550-4579
N0 Sydney Metro

>=$99

>=$199

1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-
2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1 Sydney 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775,
2778-2786
N4 Tweed Heads 2485-2486
V0 Melbourne Metro 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1 Melbourne 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5 Coolangatta 4225
Q2 QLD Country Near 4309-4453, 4580-4693
Q3 QLD Country Mid

>=$99

>=$199

>=$299

>=$399

4454-4499, 4694-4802, 4804-4805, 9920-9960
GF Gosford 2250-2263
WG Wollongong 2500-2507, 2515-2532
NC Newcastle 2282-2310
CB Canberra 200-299, 2600-2620, 2900-2920
S0 Adelaide Metro 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1 Adelaide 5114, 5118-5124, 5131-5157, 5170-5200
N3 Albury 1936-1999, 2640-2641, 2708-2709
N2 NSW Country 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-
2879
V3 Wodonga 3689-3690
Q4 QLD Country North 4803, 4806-4999, 9961-9998
GL Geelong 3211-3220
W0 Perth Metro 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-
6996
W1 Perth 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991,
6997-6999
T0 Tasmania Select

>=$199

>=$299

>=$399

>=$699

7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1 Tasmania 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR Ballarat 3350, 3353-3356
V2 VIC Country 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925,
3945-3974, 3979, 3984-3999
AAT Aust Antarctic Territory* 7151-7154
S2 SA Country 2880-2889, 5201-5749
NT1 NT Near 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2 NT Remote 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF Norfolk Is* 2898-2899
W4 Christmas  & Cocos Is* 6798-6799
W2 WA Country South 6215-6700
W3 WA Country North 6701-6797

DEWALT DCF894N-XJ - 18V XR Cordless Brushless 1/2" Mid Torque Impact Wrench Skin

  • Views: 2745
  • Product Code: DCF894N-XJ
  • Warranty:
  • RFQ

All Orders Over $99 Free Shipping*

Tags: DEWALT, DCF894N-XJ, 18V, Cordless Impact Wrench, Brushless Impact Wrench, 1/2" Impact Wrench, Mid Torque Impact Wrench, Impact Wrench, Skins

LaserX X55 - 5m 5 Piece Staff The LaserX X55 has been discontinued. Please check on oth..
RFQ
Hafco Starrett W429B - 3TPI Carbon Steel Wood Band Saw Blade for BP-630 Specifications: Sui..
$71.50
Carb-I-Tool T 604 B - 6.35 mm (1/4”) Shank 3.2mm Rad 2 Flute Beading Bits w/ Ball Bearing Guide F..
$56.75
DEWALT DCF897N-XJ - 18V XR Cordless Brushless 3/4" High Torque Impact Wrench Skin Features: ..
$609.00
DEWALT DCF961H2T-XE - 18V XR Brushless 1/2inch 2 X 5.0AH Premium High Torque Impact Wrench Kit ..
$999.00
Metabo SRE 4351 TurboTec - 240V 350W Orbital Sander with TurboTec 611351000 Features: ..
$419.00
Milwaukee 4932399333 - 25 x 250mm 4 Cut SDS Plus Drill Bit Features: Symmetrical 4 cutter g..
$75.40