• 4 Roll Feeder – Driven by a robust 4 Roll drive system to ensure smooth wire feedability
• Memory Push Button – Easy access memory to store up to 15 of your favourite welds
• Gas Purge / Wire Inch Push Buttons – Easy access push buttons to either purge shielding gas through the torch, or feed wire without wasting shielding gas.
• User Friendly – Simple to use push button design
• Adjustable Advanced Features – Burnback, Inductance, 2T/4T, Spot/Stitch Weld, Pre/Post Flow, Crater Fill, Crater Current, Crater Volts, Run In, Creep Feed & Down Slope.
• Auto Set Plate Thickness Control – Pre-programmed with synergic lines determined by material type, plate thickness and consumable diameter
• Heat Trim Control – Allows the user to customise and tweak their voltage for optimal performance when in AUTO SET MIG mode.
• 3 IN 1 Multi-Process – A true multi-process machine offering outstanding welding results across MIG, Stick TIG.
• Auto Set Process – Auto Set parameters for MIG.Determined by material type, thickness & consumable diameter.
• Current Range – Current range for this Power Source is 30 to 355A (MIG Mode) of DC Welding Output.
• Heat Trim – Customisable Heat Trim Function allows user to tweak voltage for optimal performance (in AUTO SET MIG only).
• Push Button Interface – Simple Push button display for easy navigation.
• MIG (GMAW/FCAW) 355A @ 60%
  0.6-1.2mm: Solid Wires & 0.8-2.0mm: Gasless Wires. 0.9-1.2mm: Aluminium Wires.
  0.9-1.2mm: Stainless Steel Wires.
  0.8-1.2mm: Silicon Bronze Wires.
• STICK (MMAW) 355A @ 60% – Power Source suitable for 2.0mm, 2.5mm, 3.2mm and 4mm and 5mm electrode sizes.
• TIG (GTAW) 355A @ 60% – Lift TIG function provides smooth starting and running characteristics across varying applications.
• Arc Control – Variable inductance for softer arc and less spatter or stronger arc and increased penetration.
• Euro Torch Connection
• Warranty
  3 Year Limited Warranty*
  *Refer to the operating manual for further details.

Specifications:

• Transmig 355i Power Source Dimensions: 700H x 287W x 517D mm
• Transmig 355i Power Source Weight: 45kg
• Number of Phases: Three Phase
• Nominal Supply Voltage: 415 VAC 15%
• Transmig 355i Compact Plant: W1003511
• Cooling: Fan Cooled
• Welder Type: MIG, STICK, LIFT TIG, AutoSet MIG Inverter Power Source
• Standards: AS 60974.1-2006 / IEC 60974-1
• Nominal Supply Frequency: 50/60Hz
• Open Circuit Voltage (VRD On) Stick Weld Mode: <35V
• Effective Input Current (I1eff ): 15 Amps
• Maximum Input Current (I1max): 20 Amps
• Minimum Three Phase Generator (Recommended): 14 kVA (at 0.8 Power Factor)
• Protection Class: IP23S
• MIG (GMAW) Welding Output, 40oC, 10 min.: 355A @ 60%, 31.8V
• STICK (MMAW) Welding Output, 40oC, 10 min.: 355A @ 60%, 34.2V
• TIG (GTAW) Welding Output, 40oC, 10 min.: 355A @ 60%, 24.2V
• Warranty: 3 Year Limited Warranty*

Cigweld 454641 ProGuard Auto-Darkening Welding Helmet

Features:

• Fitted with an auto-darkening vairable shade 9-13 filter lens
• Auto-darkening filter lens is equipped with four arc sensors suitable for all welding applications including low amperage TIG
• Complies with high impact safety requirements
• Large viewing area 
• True colour lens with blur light filter
• High speed reaction time
• Adjustable sensitivity and delsy
• Comfortable harness assembly to adjust and lock positions of helmet to avoid creeping
• Replaceable battery with solar assist for extended battery life
• Positive lock-up head harness keeps the helmet securely in the up rioght position with an easy nod-down feature for welding 

Suitable For:

• MIG:
  • All MIG Welding - Including Flux Cored
• TIG:
  • Low Amperage: 5A & Above DC & AC

Specifications:

• Filter Lens Type: 9-13
• Standard: AS/NZS 1337.1:2010
• Viewing Area: 100x50mm
• Power Supply: 1 x CR2450 Lithium Battery
• Reaction Time: 0.07ms
• Operating Temperature: -10ºC ~ 65ºC
• Weight: 0.5kg

Cigweld 646755 - Heavy Duty Welding Gloves

Features:

• Heavy Duty welding gloves suitable for a wide range of welding applications
• Manufacturered from high quality leather for superior heat and abrasion resistance
• Kevlar stitching for increased durability
• Full sock lining for maximum comfort